Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
8 Mic/Line Input Expander for iDR System
Series: iDR
Model: iDR-In
Part #: AH-iDR-In
- RJ45 connector
- Proprietary 8 channel digital audio
- Connects to iDR-4 or iDR-8 main unit
- CAT5 STP cable up to 250 metres (825 feet)
- 24bit resolution
Product Info
Tech Specs
Documents
The iDR-In audio expander provides an additional 8 mic/line inputs on XLR when connected to an iDR-4 or iDR-8.
iDR-In converts the analogue audio to an 8 channel wide digital bus which feeds the main iDR unit, which can be up to 250 metres away, via CAT5 STP cable. iDR-In features high grade mic/line preamps with PC configured gain, pad and phantom power switching via DR-Link, and a built-in soft clip. The expander has 8 front panel LEDs in addition to the 3 status indicators - these are 3-colour soft LEDs which can be assigned as audio meters, mute indicators or presets related indicators and are programmed in the usual way using the iDR System Manager software.
iDR-In converts the analogue audio to an 8 channel wide digital bus which feeds the main iDR unit, which can be up to 250 metres away, via CAT5 STP cable. iDR-In features high grade mic/line preamps with PC configured gain, pad and phantom power switching via DR-Link, and a built-in soft clip. The expander has 8 front panel LEDs in addition to the 3 status indicators - these are 3-colour soft LEDs which can be assigned as audio meters, mute indicators or presets related indicators and are programmed in the usual way using the iDR System Manager software.
- RJ45 connector
- Proprietary 8 channel digital audio
- Connects to iDR-4 or iDR-8 main unit
- CAT5 STP cable up to 250 metres (825 feet)
- 24bit resolution
- Serial control of iDR expander units
- Proprietary Allen & Heath control protocol
- IN and OUT ports provided to allow daisy chaining through multiple units
- CAT5 STP cable up to 300 metres (1000 feet)
- Universal mains input switched mode design
- IEC 3pin
- Country dependent mains lead supplied
- Rear panel power on/off switch
- Power –mains power on
- Link – iDR-Link control communicating
- Lock –audio communicating
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Number of Channels: 8
- Rack Units (Height): 1
- Total Harmonic Distortion + Noise (THD+N): 0.01 %
- Depth: 9.13 in
- Height: 1.73 in
- Width: 19.02 in
- Product Weight: 7.72 lbs
- Connector: Female 3pin XLR
- Sensitivity: -50dBu to +5dBu
- Gain Range: -15 to +50dB in 3dB steps
- Sensitivity (pad out): -50 to -5dBu
- Sensitivity (pad in): -30 to +15dBu
- Maximum Input Level: +33 dBu
- Pre converter soft limiter: -4dBFS switchable
- Phantom Power: 48 V DC switched
- Crosstalk: <-80 dB @ 1kHz, 0dB gain
- Residual Output Noise: <-93 dBu
- Input to output noise @: 0 dB gain <-87dBu
- Input to output noise @: 50 dB gain <-73dBu
- Latency: <2.4ms expander XLR to/from iDR XLR
- AC Mains Input: 100 to 240 V AC 50/60Hz, 25VA max
- Fuse: T500mAL 20mm
Expander
1214 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Allen & Heath
Model: iDR-In
Request more information from a dealer near you
close
Request more information from a dealer near you