Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Twin Mount Back Electret Microphone
Model: C 420E
- Twin mount back electret condenser microphone Constructed from high quality brass
- Each microphone has individually adjustable angled solid shafts
- Phantom power required 9 – 48 Volts
- Inline phantom power adaptor contains a switchable 10 dB pad and bass cut filter
- Two independent microphones offers fail safe operation
Product Info
Tech Specs
Related Products
Documents
the C 420E is a twin mount back electret condenser microphone and Each microphone has individually adjustable angled solid shafts, Inline phantom power adaptor contains a switchable 10 dB pad and bass cut filter, 309mm long in satin black. Designed for us in places of worship, conferencing, broadcasting and other places requiring twin microphone for backup / fail safe operation. Twin mount back electret condenser microphone with a cardioid polar pattern. Constructed from high quality brass each microphone is fixed to solid shafts which can be individually adjusted 180 degrees for correct vertical angle. Phantom power required 9 – 48 Volts dc. The inline phantom power adaptor contains a switchable 10 dB pad and bass cut filter(-4dB per octave at 400 Hz to –6dB per octave at 100 Hz).
- Twin mount back electret condenser microphone Constructed from high quality brass
- Each microphone has individually adjustable angled solid shafts
- Phantom power required 9 – 48 Volts
- Inline phantom power adaptor contains a switchable 10 dB pad and bass cut filter
- Two independent microphones offers fail safe operation
- Terminating in a 5pin Male XLR
- Microphone Type - Electret Condenser
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 18 kHz
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Minimum Frequency Response (Bandwidth): 50 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Impedance: 200 ohm
- Sensitivity: -44 dB
- Signal to Noise Ratio: 120 dB
- DC Voltage: 48 Volts
- Sensitivity: -44.0dB +/- 3dB @ 1Khz (0db =1V/Pa)
- Power Requirements: 9 to 48 V
SM 80SN-RF LATCH
- Tiny Q Through Table Microphone Shock Mount with Latching Switch
SM 80SN-RF PTT
- Tiny Q Through Table Microphone Shock Mount with PTT Switch
Twin Mount Back Electret Microphone
120 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Clockaudio
Model: C 420E
Request more information from a dealer near you
close
Request more information from a dealer near you