Fiber Optic Systems : Fiber Optic Extenders : Network Technologies Inc (NTI) - ST-FOHD-SC50

HDMI Extender via One SC Multimode Fiber Optic Cable

Series: XTENDEX®

Model: ST-FOHD-SC50

Signal transmission via single-strand multimode SC fiber optic cable – no RF interference.
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
Compact and durable design — allowing for easy connection and placement.
HDMI features supported: 36-bit Deep Color, Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, and DTS.
Bandwidth up to 4.46 Gbps

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Accessories

The XTENDEX® HDMI Extender via Fiber Optic Cable locates an HDMI display up to 980 feet (300 meters) away from a video source using a single SC multimode fiber optic strand. Each extender consists of a transmitter that connects to a video source and a receiver that connects to a display. For detailed product information visit http://www.networktechinc.com/fiber-hdmi-extender.html

Signal transmission via single-strand multimode SC fiber optic cable – no RF interference.
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
Compact and durable design — allowing for easy connection and placement.
HDMI features supported: 36-bit Deep Color, Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, and DTS.
Bandwidth up to 4.46 Gbps
HDCP compliant.
Supports the DDC2B protocol.
Supports full 60fps video.
No software to install.
Cables can be installed in conduit prior to extender installation.

Fiber Optic Connector Type - SC-SC
Fiber Optic Signals Supported - HDMI
Warranty - Yes
Spec Sheet available - Yes

Connectors: One male HDMI connector. One simplex SC fiber optic port for sending/receiving high definition video/audio signals and DDC signal.
Resolutions: Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 up to 980 feet (300 meters). Supports full 60fps video.
Power: Transmitter: powered from attached video source. Receiver: 110 or 220 VAC at 50 or 60 Hz via AC adapter. (US, EURO, UK, or AUS AC adapter included.)
Cables: Use a simplex SC multimode 50-micron fiber optic cable (FIBER-S-SCSC-50-xxM) or 62.5 micron fiber optic cable to extend the receiver from the transmitter up to 980 feet (300 meters). Cables not included.
Environmental: Operating temperature: 32 to 122°F (0 to 50°C). Storage temperature: -4 to 158°F (-20 to 70°C).
Dimensions: 3.33x1.31x0.46 in (85x33x11 mm) with 8.5-inch (216-millimeter) male HDMI cable attached (local and remote unit)
Warranty (Length/Type): Two years.
Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
Operating Distance (Multimode): 980 ft
Operating Distance (Singlemode): 980 ft
Certifications: CE, FCC, UL
Number of Connectors: 4
Number of Multimode Inputs: 1
Number of Multimode Outputs: 1
Number of Singlemode Inputs: 1
Number of Singlemode Outputs: 1
AC Voltage (Maximum): 220 Volts
AC Voltage (Minimum): 110 Volts
Depth: 1.31 in
Height: 0.46 in
Width: 3.33 in
Regulatory Compliance: CE, FCC, UL, TAA Compliant
Max Distance: 980 feet (300 meters) over 50µm or 62.5µm multimode SC fiber optic cable.
Connectors: One male DisplayPort connector. One simplex SC fiber optic port for sending/receiving high definition video/audio signals, and DDC signal.

ST-FOHD-SC50 - Data Sheet 130 kb - Data Sheet

Project List

ST-FOHD-SC50 - Manual 151478 kb - Instructions

Project List

FIBER-S-SCSC-50-100M
Compatible Simplex 50-micron SC/SC Fiber Optic Cable - 328 ft (100 m)

FIBER-S-SCSC-50-300M
Compatible Simplex 50-micron SC/SC Fiber Optic Cable - 984 ft (300 m)

FIBER-S-SCSC-50-50M
Compatible Simplex 50-micron SC/SC Fiber Optic Cable - 164 ft (50 m)

Find a Dealer