PA-240Z is a high-performance Hi-Z (70V/100V) and Lo-Z (4/8-ohm) controllable power amplifier featuring balanced and unbalanced inputs and line-level output. This powerful amplifier is suitable for large-scale applications.
Single Channel of 240W into a 70V/100V line
2 channels of 120W into 4/8-ohm
Balanced stereo line level output
Individual inputs mix, EQ and HPF per output
Built-in 3 band parametric EQ
Auto-standby with adjustable threshold
Controllable via RS-232 and IP
Over current and over heat protections
Powerful, yet compact and lightweight
Applications:
Medium to large meeting rooms
Auditoriums and lecture halls
Court rooms
Retail stores and shopping centers
Hotel lobbies
Transportation hubs
Amplifier Type - Power Amplifier
Rackmountable - Yes
Spec Sheet available - Yes
Controls:
Screw trimmer amplifier attenuator, IP and RS-232
Depth:
6.42 in
Dynamic Range:
119 dB
Height:
1.72 in
Impedance:
8 ohm
Sensitivity:
-10 dBV
Width:
8.45 in
Power Handling:
240 Watt
Audio 2nd Harmonic:
0.08% at 75W RMS at 4-ohm, 6.67kHz
Maximum Voltage Gain:
26dB SE/32dB BTL
Amplifier Type:
Class D
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Maximum Frequency Response (Bandwidth):
20 kHz
Signal to Noise Ratio:
80 dB
Number of Inputs:
2
Number of Outputs:
2
Total Harmonic Distortion + Noise (THD+N):
0 %
AC Voltage (Minimum):
85 Volts
AC Voltage (Maximum):
265 Volts
Shipping Width (with packaging):
13.82 in
Shipping Height (with packaging):
2.83 in
Shipping Depth (with packaging):
8.35 in
Inputs:
•1 unbalanced stereo on a 3.5mm connector •1 balanced stereo +4dBu/10k-ohm on a 5-pin terminal block
Outputs:
•1 balanced stereo line level on a 5-pin terminal block •1 stereo or 1 mono speaker output on a 4-pin large terminal block
Output Power:
•2 x 120W at 4-ohm or 8-ohm •1 x 240W at 70V or 100V