Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
TableTop Kit for MP, MPC, and IPAC
Model: TTK-MP/MPC/IPAC
Compare
Project List
Product Info
Tech Specs
Documents
Other Options
The TTK-MP/MPC/IPAC provides a stylish and convenient tabletop enclosure for an MP Series Media Presentation Button Panel, MPC Media Presentation System, or IPAC Integrated Professional Automation Computer.[1] The device's front panel is angled at 45 degrees when installed in the enclosure. The complete assembly may be placed on any flat, level surface, with the option to attach it permanently to the surface using screws.
An optional swivel mount accessory is also available[2], providing a means for permanently mounting the enclosure while retaining the ability to rotate it for optimal positioning. The swivel range can be customized using optional limit screws, with a maximum of 330-degree rotation allowed. The swivel mount may be installed on any flat table, desk, or counter top surface with a thickness of 1 inch (25 mm) minimum to 1 3/8 inch (35 mm) maximum.
Wiring may be passed out the rear of the enclosure through a grommet and strain relief, or routed through the bottom for a very clean, cordless appearance. The rear wire opening can accommodate a single cable up to 1/4 inch (6.4 mm) diameter such as Crestron Cresnet® or standard CAT5. The bottom opening measures 29/32 inch (23 mm) diameter, while the swivel mount[2] can accommodate a bundle of wires up to 11/16 inch (17 mm) diameter.
An optional swivel mount accessory is also available[2], providing a means for permanently mounting the enclosure while retaining the ability to rotate it for optimal positioning. The swivel range can be customized using optional limit screws, with a maximum of 330-degree rotation allowed. The swivel mount may be installed on any flat table, desk, or counter top surface with a thickness of 1 inch (25 mm) minimum to 1 3/8 inch (35 mm) maximum.
Wiring may be passed out the rear of the enclosure through a grommet and strain relief, or routed through the bottom for a very clean, cordless appearance. The rear wire opening can accommodate a single cable up to 1/4 inch (6.4 mm) diameter such as Crestron Cresnet® or standard CAT5. The bottom opening measures 29/32 inch (23 mm) diameter, while the swivel mount[2] can accommodate a bundle of wires up to 11/16 inch (17 mm) diameter.
- Spec Sheet available - Yes
- Enclosure:
Injection-molded plastic, black or white; 45° fixed angle device opening; freestanding, surface mount, or swivel mount installation
- Dimensions:
- Height:
3.48 in (8.84 cm);
3.57 in (9.07 cm) with swivel mount - Width: 6.71 in (17.03 cm)
- Depth:
4.63 in (11.76 cm);
4.11 in (10.42 cm) without rear wire grommet - Height With MP, MPC, or IPAC device installed:
3.84 in (9.75 cm);
3.93 in (9.98 cm) with swivel mount - Width With MP, MPC, or IPAC device installed: 6.71 in (17.04 cm)
- Depth With MP, MPC, or IPAC device installed:
4.99 in (12.67 cm);
4.47 in (11.34 cm) without rear wire grommet - Depth: 4.63 in
- Height: 3.48 in
- Width: 6.71 in
Crestron TTK-MP-MPC-IPAC Spec Sheet.pdf
219 kb
- Data Sheet
Project List
by
Crestron Electronics, Inc.
Model: TTK-MP/MPC/IPAC-W
Tabletop Kit for MPC3-302, MP-B10 and MP-B20 Series Media Presentation Button Panels, Black Textured
by
Crestron Electronics, Inc.
Model: TTK-MP/MPC/IPAC-B-T
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Crestron Electronics, Inc.
Model: TTK-MP/MPC/IPAC
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you