Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Subwoofer Crossover Filter
Series:
Model: ST-CX2S
- Subwoofer Signal from Stereo Source
- Adjustable Low-Frequency Boost
- Low-Noise and Low-Distortion Crossover
- Active Crossover Component
- RDL® SupplyFlex™ Power Input Configuration
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories
The ST-CX2S is a subwoofer signal equalizer in the STICK-ON series of products from RDL. The ST-CX2S offers flexibility in equalization adjustment, with the exceptional performance of RDL. The ST-CX2S features two separate, isolated balanced bridging inputs which may each be wired balanced or unbalanced. The output driver is 150 ohm balanced which can drive low or high impedance balanced or unbalanced lines. The module operates at unity gain at 63 Hz (balanced input to balanced output). A BOOST control permits adjustment of the output at 32 Hz from flat to +5.5 dB. The ST-CX2S features RDL's SupplyFlex power input configuration for operation directly from ground-referenced, floating or bipolar 24 Vdc power.
- Subwoofer Signal from Stereo Source
- Adjustable Low-Frequency Boost
- Low-Noise and Low-Distortion Crossover
- Active Crossover Component
- RDL® SupplyFlex™ Power Input Configuration
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Total Harmonic Distortion + Noise (THD+N): 0.01 %
- Depth: 0.65 in
- Height: 1.55 in
- Width: 3 in
- Shipping Weight: 0.20 lbs
- Inputs (2): 50 k ohm balanced line-level (+4 dBu)
- Outputs: 150 ohm balanced line-level (+4 dBu)
- Output Bandwidth: 22 to 80 Hz (adjustable BOOST)
- High Frequency Attenuation: greater than 45 dB
- Gain: Unity at 63 Hz
- Headroom: 18 dB minimum at 30 Hz (maximum boost)
- Input CMRR: greater than 60 dB
- Residual Noise: less than 90 dB
- Power Requirement: 24 to 33 Vdc @ 30 mA
Datasheet for Subwoofer Crossover Filter
178532 kb
- Other
Project List
DRA-35S
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
PM-1T
Pole Mount Tray
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
PM-1T
Pole Mount Tray
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Radio Design Labs
Model: ST-CX2S
Request more information from a dealer near you
close
Request more information from a dealer near you