Lee Hartman & Sons
Powered by:

Sponsored

110 to 75 Ohms Digital Audio Impedance Transformer, 10dB Attenuation Pad, XLR3 (F) to BNC (F) Connector

Impedance transformers allow 75 ohms coaxial transmission of all 2-channel AES/EBU digital audio signals.
Model: BCJ-XJ-A10TRA
  • SMPTE 276M and AES3 transmission standards
  • Coaxial routing of 2-channel AES/EBU digital audio
  • Permits longer cable runs vs 110 ohms twisted pair
  • AES/EBU signal distribution using Canare 75 ohms video patchbays, routers and VDA’s
  • Applicable for post production suites, recording studios, DAT routing, digital audio tie lines
Add
Compare
Save to Project
Product Information
Tech Specs
Related Products
Documents
Accessories
Videos
Impedance transformers allow 75 ohms coaxial transmission of all 2-channel AES/EBU digital audio signals. Low cost and easy to use, I/O adapters are designed to passively convert all standard AES/EBU digital audio signals from 110 ohms/XLR3 output (at 4.5V) to 75 ohms BNC coaxial cable and then back again to 110 ohms/XLR3 input (200mV minimum). Also provides excellent rejection against hum and noise.
  • SMPTE 276M and AES3 transmission standards
  • Coaxial routing of 2-channel AES/EBU digital audio
  • Permits longer cable runs vs 110 ohms twisted pair
  • AES/EBU signal distribution using Canare 75 ohms video patchbays, routers and VDA’s
  • Applicable for post production suites, recording studios, DAT routing, digital audio tie lines