Control Systems : Media Control & Distribution Systems : Gilderfluke & Company, Inc. - SER-DMX

SER-DMX: DMX-512 & ServoMotor Output miniBrick

Model: SER-DMX

The SER-DMX controls up to sixteen remote control-style ServoMotors. These use a Pulse Code Modulated (PCM) command signal with pulses that typically vary between 1.0 and 2.0 milliseconds to give you a 90° ServoMotor shaft rotation.
Accepts eight or twelve bit resolution commands from your Pc•MACs Animation Programming System.
Built-in Ease-In when shows or DMX-512 starts or stops. These keep the ServoMotors from jumping.
Networkable! The SER-DMX can act as a ‘master’, sending up to 512 channels of DMX-512 data to other GilderGear and DMX-512-compatible equipment that act as a ‘slaves’, or the SER-DMX can receive DMX-512 from an external source, and itself be a ‘slave’.
Error checking prevents any updates from bad DMX-512 data. As a ‘Master’, the SER-DMX has the DMX-512 output capacity to run most shows.

More Product Information Below

Compare

Project List

Product Info

Related Products

Documents

The latest piece of equipment to join our miniBrick line is the totally redesigned SER-DMX. The SER-DMX is used for controlling remote control-style ServoMotors from its micro Sd card, or from any Gilderfluke Animation Control System or other DMX-512 source. ServoMotors are an inexpensive way to add analog movements to animated figures.

The SER-DMX controls up to sixteen remote control-style ServoMotors. These use a Pulse Code Modulated (PCM) command signal with pulses that typically vary between 1.0 and 2.0 milliseconds to give you a 90° ServoMotor shaft rotation.
Accepts eight or twelve bit resolution commands from your Pc•MACs Animation Programming System.
Built-in Ease-In when shows or DMX-512 starts or stops. These keep the ServoMotors from jumping.
Networkable! The SER-DMX can act as a ‘master’, sending up to 512 channels of DMX-512 data to other GilderGear and DMX-512-compatible equipment that act as a ‘slaves’, or the SER-DMX can receive DMX-512 from an external source, and itself be a ‘slave’.
Error checking prevents any updates from bad DMX-512 data. As a ‘Master’, the SER-DMX has the DMX-512 output capacity to run most shows.
Micro Sd Flash card for a virtually unlimited show capacity. Up to 255 shows can be loaded onto a SER-DMX at one time. In many installations, the SER-DMX can take the place of a lighting board.
Indicator LEDs for heartbeat, trigger inputs, ServoMotor outputs, and DMX-512 status.
Two optoisolated inputs or the RS-232 serial port can be used to start, stop, or access shows.
The SER-DMX cards can be mounted in ‘inaccessible’ locations, since they are Controlled and Configured through the RS-232 serial port.
The SER-DMX runs on 7 to 24 vdc. ServoMotors typically use 4 to 6 volts. Some ServoMotors use up to 12 or 24 vdc. If using ServoMotors that need more than seven volts, you can run the SER-DMX from the same supply as the ServoMotors.
Can be mounted on Snap-Track, DIN rail (using the optional DinAdapt clips), or just screw or velcro it to the backside of whatever it is controlling.

232conv-09 - RS-232 to RS-422 9-pin Female Serial Port Adapter

Br-MultiBrick32 - 32 Digital Output Show Control System

C-1p - Shielded Twisted Pair Cable

C-USB-RS232 - USB/RS-232 Serial Connection Cable

DinAdapt - 1-pair DIN Rail Adapter

MACs-License - Windows-Based Show Control System

MC-uSdMLC/16GB - Class-4 16GByte Multiple Level Cell Secure Digital Flash Card

MC-uSdMLC/4GB - Class-4 4GByte Multiple Level Cell Secure Digital Flash Card

MC-uSdMLC/8GB - Class-4 8GByte Multiple Level Cell Secure Digital Flash Card

MC-uSdSLC/2GB - Class-10 industrial Grade 2GByte Micro Secure Digital Flash Card

MC-uSdSLC/4GB - Class-10 industrial Grade 4GByte Micro Secure Digital Flash card

MC-uSdSLC/8GB - Class-10 industrial Grade 8GByte Micro Secure Digital Flash card

PB-DMX/08 - 8-output Relay Controller

PB-DMX/16 - 16-output Relay Controller

PB-DMX/24 - 24-output Relay Controller

PB-DMX/32 - 32-output Relay Controller

PS-12vdc/1.2US - 10W Switching Power Supply

PS-12vdc/5.0A - 60W Switching Power Supply

PS-12vdc/800MA/U - 10W 800mA Switching Power Supply

PS-12vdc/800mA/Univ - 10W 12VDC Switching Power Supply

SER-DMX Cut Sheet 393 kb - Brochure

Project List

Find a Dealer

Suggested Products

4 Pair Stereo Speaker Selector Box

by Vanco International

Two Source, Four Pair Stereo Speaker Select Box with Volume Control

by Vanco International

3-series 4K DigitalMedia Presentation System 350 with AirMedia 2.0 capability built-in

by Crestron Electronics, Inc.