Acroname USBHub3+ Programmable Industrial USB 3.2 Gen 1 Hub (8 Ports)
Model: S79-USBHUB-3P
- Supports USB hosts and devices up to USB 3.2 Gen1 (5Gbps); backwards compatible with USB1, USB2
- Individually enable/disable any of 8 downstream ports
- Measure voltage and current on each downstream port
- Hi-Speed data, SuperSpeed data and power lines can be separately enabled for each downstream port
- Set programmable current limits for each downstream port (up to 4A)
Building on the trusted and robust design of Acroname's USBHub2x4, Acroname is proud to offer the USBHub3+, a USB 3.2 Gen 1 Hub with 8 programmable ports. Designed by engineers for engineers - connect the USBHub3+ with confidence to expensive lab or production equipment. Designed and certified to withstand ±15kV ESD strikes (certified to IEC61000-4-2 Level 4). With two separate upstream inputs, you can connect devices to either one of two hosts. A third computer can be attached via the Control Port to independently select the upstream input
Take control and optimize your manufacturing, testing, and development environments. Features 8 programmable ports. Control USB hi-speed, SuperSpeed, and power lines. Set port current limits. Monitor voltage and current. Auto-switch between two input ports, and expand to multiple hubs via the expansion port. Built to withstand±15kV ESD strikes
- Supports USB hosts and devices up to USB 3.2 Gen1 (5Gbps); backwards compatible with USB1, USB2
- Individually enable/disable any of 8 downstream ports
- Measure voltage and current on each downstream port
- Hi-Speed data, SuperSpeed data and power lines can be separately enabled for each downstream port
- Set programmable current limits for each downstream port (up to 4A)
- Dedicated Control Port for software control; independent of the selected upstream port
- Select between two (2) host connections
- All ports support USB link speeds up to 5Gbps
- Detect established link speed on each port: SuperSpeed (5Gbps) or Hi-Speed (480Mbps)
- Supply up to 5A per port; measure upto 4A
- Set enumeration delay for discovery of attached downstream devices
- Backward compatible with USB 2.0 and USB 1.x devices
- Boost USB 2.0 upstream and downstream signal levels
- DIN-rail mountable
- Alternate Euro-style terminal block power input connector
- Certified to +/-15kV ESD strikes (IEC61000-4-2 level 4)
- Overvoltage and reverse current protected Vbus outputs
- Monitor voltage and current on any/all ports
- Maintain selectable control of data, SS lines, power lines for any port
- Enable/Disable any downstream port
- Warranty - Yes
- Spec Sheet available - Yes
- Depth: 4.30 in
- Height: 1.06 in
- Width: 5.42 in
- Number of Ports: 8
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- AC Voltage: 36 Volts
- Active Power: 85 Watt
- Current Draw: 5 Amps
Suggested Products
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com