Signal Processing Systems : AV Input / Output Boards & Cards : AMX - DGX-I-DXF-MMS

Enova DGX DXLink Multimode Fiber Input Board

Model: DGX-I-DXF-MMS

Part #: FG1058-623

Clear Connect Enabled – Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
Perfect Way to Add Light Control – Easily integrates with existing electrical infrastructures – simply replace the light switch
Simple Web Configuration – Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

OVERVIEW

The DGX-I-DXF-MMS is a DXLink Fiber input board with field serviceable SFP modules designed for use with multimode fiber, and is compatible with the Enova DGX 8, 16, 32 and 64 Digital Media Switcher Enclosures. Use it as part of an integrated system to receive audio and video, over multimode fiber from up to 300 meters from a DXLink Fiber Transmitter. Fiber uses light to send data, rather than electric signals, making it both the highest quality and most secure way to transmit video as it is not susceptible to electronic noise or non-intrusive physical wiretapping. Further, by removing the fiber return path simplex models provide an added layer of security.

COMMON APPLICATIONS

The Enova DGX DXLink Input Board is ideal for applications where the demands of high-resolution video clarity, long distance transmission and maximum security need to be met without compromise including campus-wide distribution of sources that are shared between classrooms, secure military applications, casinos, arenas and museums.

Clear Connect Enabled – Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
Perfect Way to Add Light Control – Easily integrates with existing electrical infrastructures – simply replace the light switch
Simple Web Configuration – Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch

Input/Output Board/Card Type - Audio
Input/Output Board/Card Type - Data
Input/Output Board/Card Type - Network
Input/Output Board/Card Type - Video
Warranty - Yes
Spec Sheet available - Yes

Regulatory Compliance: HDCP
Warranty (Length/Type): 3 Years Limited
General:
- Compatible AMX Products: Must be used in conjunction with an Enova DGX 8, 16, 32 or 64 Digital Media Enclosure and a DXLink Multimode Fiber Transmitter including DXF-TX-MMS (FG1010-363) or DXF-TX-MMD (FG1010-362), Note: Use fiber duplex models for bidirectional control over fiber. Simplex models do not support control transport over fiber; although when used as part of a complete Enova DGX solution, control can be provided if a supplemental independent network connection is used. See the "Instruction Manual - Enova DGX Digital Media Switchers”
- Regulatory Compliance: See Enova DGX Digital Media Switcher Enclosure for regulatory compliance
- Safety Certification: Class 1 Eye safe per requirements of IEC 60825-1 / CDRH
- Recommended Accessories:
  - DXF-TX-MMS, DXLink Multi-Format Multimode Fiber Transmitter, Simplex (FG1010-363)
  - DXF-TX-MMD, DXLink Multi-Format Multimode Fiber Transmitter, Duplex (FG1010-362)
SIGNAL TRANSPORT – DXLINK WITH MULTIMODE FIBER, SIMPLEX:
- Compatible Formats: HDMI Video / Audio over fiber
- Signal Type Support: DXLink Multimode Fiber, Simplex/Duplex
- Connectors: (4) Duplex LC Fiber Ports, conforming to ANSI TIA/EIA 604-10 (FOCIS 10A), Only the receive portion of the SFP+ module is active
- Transport Layer Throughput (Max): 10.3125 Gbps
- Fiber Transceiver Type: 10G SFP+
- Fiber Cable Type: OM3 50/125µm
- Fiber Cable Length: Up to 984 ft (300 m)
- Optical Wavelength: 850 nm
- Multimode Optical Budget:
  - 6.8 dB (typ), 3.2 dB (stressed) between DXLink Fiber Transceivers
  - Optical Modulation Amplitude (OMA): -4.3 dBm (min)
  - Optical Modulation Amplitude (OMA) Sensitivity: -11.1 dBm (typ), -7.5 dBm (stressed)
- Multimode Optical Transceiver Mean Output Power: -1 dBm (average power)
- DXLink Fiber Input Board Propagation Delay: 5 us
- Video Data Rate (Max):
  - 4.95 Gbps / 5.568 Gbps
  - 5.568 Gbps supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
- Video Pixel Clock (Max):
  - 165 MHz / 185.625 MHz
  - 185.625 MHz supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
- Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz
- Interlaced Resolution Support:
  - 480i, 576i, 1080i
  - System design note: If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through unaltered to DXLink Twisted Pair and Fiber Receivers; if in scaler Bypass mode local DVI and HDMI output boards will still deinterlace video to a progressive resolution format.
- 2K Resolution Support:
  - 2048x1024 @ 47Hz, 2048x1080 @ 60Hz, 2048x1152 @ 60Hz, 2048x1536 @ 24Hz
  - 2K formats are only compatible with the DVI, HDMI and DXLink Fiber Input/Output boards and require the output or RX Scaler to be set in Bypass mode
- Deep Color Support:
  - 24-bit, 30-bit
  - 30-bit supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
- Color Space Support:
  - RGB 4:4:4
  - YCbCr 4:4:4 and 4:2:2
  - Input signal support for YCbCr: 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
- 3D Format Support
  - Yes (scaler on corresponding output board or RX must be set to bypass mode)
  - Frame Packing 1080p up to 24 Hz
  - Frame Packing 720p up to 50/60 Hz
  - Frame Packing 1080i up to 50/60 Hz
  - Top-Bottom 1080p up to 24 Hz
  - Top-Bottom 720p up to 50/60 Hz
  - Side-by-Side Half 1080i up to 50/60 Hz
- Audio Format Support:
  - Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM
  - Dolby Digital and DTS support up to 48 kHz, 5.1 channels
- Audio Resolution: 16 bit to 24 bit
- Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
- Local Audio Support: Yes, Insertion and/or Extraction of 2 CH L-PCM selectable by channel when used in conjunction with Enova DGX Audio Insert / Extract Board
- HDCP Support:
  - Yes, full matrix HDCP support (includes any input to any or all outputs)
  - Key Management System: AMX HDCP InstaGate Pro Technology
  - Key support up to 16 sinks per output, independent of source device
- CEC Support: None
Note: Connectivity between DXLink Fiber Transmitters and DXLink Fiber Input Boards / DXLink Fiber Output Boards and DXLink Fiber Receivers products requires matching fiber cable types, Multimode to Mutimode and Single Mode to Single Mode. Duplex / Simplex compatibility is allowed. A variety of boards can be used within a common enclosure.