Minimal Compression 1080p60 Video over IP Decoder with PoE
Series: N1000
Model: NMX-DEC-N1222
Part #: FGN1222-SA
- Output Scaling-Video scaling at output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
- 1 Frame Latency-Same as HDBaseT
- Minimal Proprietary Compression (MPC) -Visually lossless MPC algorithm
- Optional Compression-Available option to disable all compression
- Power Over Ethernet (PoE) -PoE eliminates the need for power supply
The new NMX-DEC-N1222 model features improved digital pixel reproduction and reduces latency to an industry leading 10-ms for gigabit links. Packetized video streams not only remain visually lossless throughout distribution, they also arrive instantly.
The N1000 Series Encoders and Decoders are an affordable local AV over IP switching solution that packetizes video into a minimally compressed IP format to create anywhere from a small 2×1 seamless presentation switcher up to a large 32×32 matrix switcher by connecting them directly to off-the-shelf layer-3 network switches.
The ability to send IP Media for distribution using common managed network switches in any size and configuration makes N1000 solutions extremely flexible and easy to deploy.
COMMON APPLICATION
The NMX-DEC-N1222 is the perfect solution for any low-latency application and video matrix smaller than 32x32. Common applications include classrooms, conference rooms, performing arts, and sports bars.
- Output Scaling-Video scaling at output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
- 1 Frame Latency-Same as HDBaseT
- Minimal Proprietary Compression (MPC) -Visually lossless MPC algorithm
- Optional Compression-Available option to disable all compression
- Power Over Ethernet (PoE) -PoE eliminates the need for power supply
- Infrared (IR) -Infrared emitter connection allows control of low-cost, IR-only display devices
- Onboard Control-All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
- Unmatched Flexibility-Highly competitive pricing for matrices up to 32x32
- Two RJ45 Ports-Decoder features two RJ45 network ports (one PoE)
- Stand Alone or Card-Available as a stand alone device, or card for use with NMX-ACC-N9206
- Decoder or Encoder Signal Type - Audio
- Decoder or Encoder Signal Type - Video
- Decoder/Encoder Type - Other
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE, FCC
- Input Signal Types: Ethernet
- Number of Channels: 2
- Output (Decoded/Encoded) Signal Type: Embedded audio
- Video:
- Digital Video Input: Network video over Ethernet via RJ45 port or fiber via 1G SFP port
- Video Output: HDMI, DVI-D (through adapter)
- Formats: HDMI, DVI-D (through adapter), HDCP content protection support
- Output Resolutions:
- HDMI and DVI (Progressive)
- Pixel clock between 27 MHz - 165 MHz
- Minimum resolution of 720x480p
- Maximum horizontal resolution of 1920 or a vertical resolution of 1200
- HDMI and DVI (Progressive)
- Audio:
- Input Signal Types: Network video over Ethernet via RJ45
- Output Signal Types: Embedded audio on DVI-D or HDMI (through adapter)
- HDMI Audio Formats: 8ch PCM
- Analog Audio Format: Stereo 2-channel
- Digital-to-Analog Conversation: 16-bit 32 kHz, 44.1 kHz and 48 kHz (matched to Encoder settings)
- Latency:
- Latency: Latency is 10 ms for all unscaled resolutions. Scaling can add up to one frame (17 ms for 60 Hz or 33 ms for 30 Hz) of latency
- COMMUNICATIONS:
- Ethernet
- P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- P1: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- Ethernet
- Ports:
- +12V 2A: One 12 Volt DC power input
- P0
- 8-wire RJ45 female
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides the network connection, network AV video, and power to the Encoders and Decoders
- P1
- 8-wire RJ45 female
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- IR:
- 2-pin terminal Phoenix connector.
- Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- RS232:
- 3-pin terminal Phoenix connector
- Provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
- AUDIO:
- 5-pin terminal Phoenix connector
- Provides user-selectable balanced/unbalanced input. Dedicated audio input
- HDMI Out: HDMI video output
- CONTROLS AND INDICATORS-FRONT PANEL:
- RESET Button
- Recessed pushbutton
- Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID Button
- Recessed pushbutton
- Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED
- On solid (green) when operating power is supplied (via PoE or local power supply)
- This activity is also shown by the PWR LED on the rear panel
- STATUS LED
- On flashing (green) when there is software activity
- This activity is also shown by the STAT LED on the rear panel
- RESET Button
- CONTROLS AND INDICATORS-REAR PANEL:
- PWR LED: Same as POWER LED described above
- HDMI LED: On (green) when there is a connection to a valid video source
- STAT LED: Same as STATUS LED described above
- STRM LED: On (green) when the unit is streaming video
- POWER SUPPLY:
- Power Supply, External, Not Included: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; not included in shipment. NMX-ACC-N9312 (FGN9312)
- Humidity: 10 to 90 % RH (non-condensing)
- Heat Dissipation: Up to ~44 BTU/hr
- General:
- Mounting Options
- Stand alone, surface mount, wall mount, or rack mount
- Surface and wall mounting requires (not included): NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver
- Rack mounting requires one of the following (not included)
- NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
- NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
- Mounting Options
- Warranty (Length/Type): 3 Years Limited
- DC Voltage: 12 Volts
- Current Draw: 2 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Depth: 5 in
- Height: 1.05 in
- Width: 7.80 in
- Product Weight: 1.47 lbs
Suggested Products
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com