Pro AV Catalog
Evertz  - 7707ETxx-F2
Request Quote
All Products
evertz

Ethernet Fiber Transceiver, Dual Fiber, CWDM, DFB Laser, VistaLINK®

Model: 7707ETxx-F2

  • 2 10BaseT Ethernet channels or one 100Base-TX Ethernet channel
  • Auto negotiation for 10/100 speed and half/full duplex modes
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
  • Local display of optical signal strength, link parameters and link status
  • Optical output available in 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
Compare
Project List
Product Info
Tech Specs
Documents
The 7707ET is a VistaLINK® capable Ethernet Fiber Transceiver that provides an economical method of transmitting two 10BaseT Ethernet channels or one 100Base-TX Ethernet channel over optical fiber. The transceiver is IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX compliant. It mediates between a 10/100BASE-TX segment and supports both full duplex and half-duplex operation. Monitoring of card status and parameters is provided locally at the card edge and remotely via VistaLINK®. A pair of 7707ET transceivers permits full duplex communication over single or dual optical fibers. Diagnostic LEDs provide indication of power, link status and data reception. The 7707ET occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
  • 2 10BaseT Ethernet channels or one 100Base-TX Ethernet channel
  • Auto negotiation for 10/100 speed and half/full duplex modes
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
  • Local display of optical signal strength, link parameters and link status
  • Optical output available in 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
  • DWDM wavelengths (ITU-T G.694.1 compliant) also available
  • Supports single-mode and multi-mode fiber optic cable
  • Fully hot-swappable from front of frame with no fiber or Ethernet channel disconnect required
  • SC/PC, ST/PC or FC/PC connector options
  • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
 
Request Quote
 
Go to Top