The RC-74DL is a 12-button master room controller with a digital volume knob for multimedia rooms. The unit can function either as a standalone controller or as part of a more complex room control system to control audio components, video components and other room facilities such as lights and screens.
Macro Capability - Carries out multiple commands with a single press of a button.
Command Banks - Each button offers multiple layers of functions for alternate behavior, toggle functionality, and more.
1 USB Port - For programming.
3 Bidirectional RS-232 Ports - Control AV equipment such as projectors, LCD and PDP displays, power amplifiers, switchers and scalers.
2 IR Outputs - Additional control port for AV equipment.
IR Learning Function - Learns commands from IR remotes.
4 Contact Closure Ports - Conveniently control other room items related to the AV system such as raising and lowering drapes, the screen or the projector.
2 GPI/O Ports - General purpose I/O ports that can be configured by K-Config as digital inputs, digital outputs or analog inputs for interfacing with a variety of devices such as sensors, switches, LEDs, or relays.
2 K-NET™ Connectors - Connect to other control panels or a central control processor.
K-NET™ Control Channel - Provides power and control data to the wall plate controllers over a single cable.
Kramer Site-CTRL Compatible - For network remote control and management using Kramer Site-CTRL software over the Ethernet port.
Configured with Kramer K-Config Software.
Mud Ring Supplied for Easy Installation.
Dimensions - 16.2cm x 2.6cm x 11.4 (6.4" x 1.0” x 4.5") W, D, H.
Note - Available in white, black, gray and brushed aluminum.
Size - Wall Plate - 3 gang US.
Applications:
Ideal for multimedia classrooms, auditoriums or conference rooms.
Systems Controlled - Audio
Spec Sheet available - Yes
Current Draw:
0.57 Amps
DC Voltage:
12 Volts
Depth:
1 in
Height:
4.50 in
Width:
6.40 in
Product Weight:
1.32 lbs
Ports:
3 RS-232, 1 RS-485, 2 GPI/O and 2 K-NET on terminal block connectors; Ethernet on an RJ-45 connector; 1 infrared sensor, 1 USB for programming
Outputs:
2 IR, 4 relays (36V AC or DC, 2A, 60V AC maximum on non-inductive load)
DEFAULT IP SETTINGS:
IP number 192.168.1.39; Mask -255.255.0.0; Gateway - 0.0.0.0