With just a glance down the hallway, the SSW provides highly-visible indication of a room’s availability as part of a complete Crestron® enterprise room scheduling solution. Its stylish appearance and vivid color illumination complement any corporate office environment. The two-sided, clear acrylic sign face glows bright green or red to indicate room availability. The sign face is custom engravable with the room number, name, or other designation. The complete sign assembly mounts to the wall over a single-gang electrical box or plaster ring.
Room Availability Status
For room scheduling applications, the SSW simply connects to a Crestron TSW-560, TSW-760, or TSW-1060 touch screen via USB. No special programming or configuration is required. The sign color is controlled by the room scheduling application Room Scheduling SmartObject®, which runs on the touch screen and syncs with the Crestron Fusion® Enterprise Management Service. The sign illuminates green when the room is available and red with when the room is occupied.
Custom RGB Color Mixing
For custom applications, the SSW can be programmed to illuminate in any desired color. Its tri-color RGB LEDs allow for a full spectrum of colors by blending the red, green, and blue elements in 1% increments per color. Custom RGB color mixing requires the SSW to be connected to a Crestron control system via Cresnet®. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired.
The SSW is available with or without custom engraving. The engraving appears on both sides of the acrylic sign face to identify the room by name or number. When illuminated, the engraving is clearly visible at a distance of 50 feet or 15 meters. Engraving can be changed at any time by purchasing a replacement sign face (model SSW-ACR).
Installing the SSW is simple. It mounts to the wall over a standard 1-gang electrical box or plaster ring. Power and communications are supplied by a single USB or Cresnet wire. For typical room scheduling applications, a six foot (1.83 meter) USB cable is included, which connects to the touch screen mounted below.
Provides highly-visible indication of room availability
Reveals every free meeting room at a glance down the hallway
Stylish wall mount design with two-sided, clear acrylic sign face
Custom engravable room name/number designation
Clearly visible and legible at 50 feet or 15 meters
Out-of-the-box functionality when used with a TSW-760 or TSW-1060 touch screen
Illuminates vivid green or red to indicate room availability status
Custom functionality possible when connected to a Crestron® control system
Supports RGB color mixing via custom control system programming
Allows virtually any color illumination (except white)
Energy efficient at less than 2W power consumption
Single-wire USB or Cresnet® connectivity
Mounts to a single-gang electrical box or plaster ring
•Humidity: 10 to 90% RH (non-condensing) •Heat Dissipation: 4 BTU/hr on USB power, 7 BTU/hr on Cresnet power
Product Weight :
Active Power :
Operating Temperature (Maximum) :
Operating Temperature (Minimum) :
•USB: USB 2.0 device for connection to a TSW-760 or TSW-1060 touch screen •Cresnet: Cresnet slave mode
•CNET: (1) 4-pin 3.5mm detachable terminal block •Cresnet slave port •USB: (1) Micro-USB Type B female •USB 2.0 device port •6ft (1.83m) micro-B male to A male USB cable included
•Composition: Metal bracket with replaceable acrylic sign face and magnetically-held gray plastic bezel •Mounting: Mounts to a 1-gang electrical box or plaster ring (optional mullion mount kit sold separately)
•Material: Acrylic, two sided •Engraving: One or two lines per side, same text each side •Illumination: Edgelit RGB LED •Functionality: Supports alternating red/green indication of room availability status when connected to a room scheduling touch screen via USB, supports custom RGB color mixing when connected to a control system via Cresnet
- 10.1" Advanced Touch Screen Control Panel
- 5" Advanced Touch Screen Control Surface
- 7" Advanced Touch Screen Control Surface