The SA1710 is a low voltage, infrared emitter power supply for new and existing infrared emitter panels. The SA1710 utilizes high-efficiency regulated switching power supply(s) adjustable from 24 / 30 DC. The SA1710 single power supply can power up to six Sound Associates SA-611, three SA-612, or two SA-613 emitter panels. This emitter power supply combines low voltage with a modulated audio signal supplied by an infrared transmitter. The emitter and power supply are connected via a single three conductor cable terminated at the power supply with either a 5 pin XLR connector or bare wire. This single cable supplies a modulated audio signal and power to the emitter eliminating the need for an electrical outlet at each emitter location. The SA1710 is equipped with a high efficiency switching power supply and a quiet forced air cooling system designed to insure years of quality performance.
Universal Input Voltage 90 - 264 VAC - Automatic Sensing.
Over voltage and over load protection.
High quality internal power supply rated at 120 Watts.
Supply can be linked with existing infrared transmitters via BNC connection.
Units can be daisy chained together.
Single rack space design.
Includes BNC-003 three foot RG59u BNC to BNC cable.
Full three-year warranty.
Chassis mount BNC
5-pin female XLR / terminal strip
Output Voltage :
30 +/- 0.5 VDC Internally adjustable
Power Input :
Universal input 90 264 VAC sensing
(1) T5 A (5 x 20) located on back panel
T2.0 A (5 x 20 mm) @ 120 V internal
T1.0 A (5 x 20 mm) @ 240 V internal
Number of Outputs :
(2) 5-pin female XLR / (1) terminal strips
Over voltage protection :
Automatic 132% maximum
Wiring of 5-pin XLR :
1, 2 - ground; 3 - signal; 4, 5 - positive DC
Wiring of terminal strip :
1 - ground; 3 - signal; 5 - positive DC
Load regulation :
3% typical, 5% maximum
Product Weight :
Silver powder coat
Modulated Audio Input/Link :
Number of inputs/outputs (links) :
Output ripple / noise pk-pk :
1% maximum at full load
Efficiency @ full load :
80% typical, 70% minimum
Short circuit and current protection :
Automatic current limit/foldback 150% max
Power Input Frequency :
47-63 Hz auto sensing
Power consumption with (6) SA611 emitters :