hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Advanced Network Devices - AND-BTN-KIT-1

Vandal-proof Call Button Kit

Model: AND-BTN-KIT-1

  • Two Way Communication:
  • Activate via push button
  • Allows for full duplex hands free com¬munication
  • Includes all necessary wiring (2 pair 10ft 22AWG) and connectors to con¬nect to AND IP endpoints
  • Cabling can be easily extended to reach further than the allotted 10ft
Compare
Project List
Product Info
Tech Specs
Documents
The AND-BTN-KIT-1 is a vandal proof button kit. AND’s call button allows for most of AND’s devices to become intercoms for hands free, bidirectional communications. Connect the IP endpoint via SIP to your IP phone network and talk from office to classroom and classroom to office at the push of a button. Program the button to recognize two commands. Push to talk to the office; push and hold to connect to campus or district security. Once connected, simply talk into the embedded microphone that is found in most of AND’s devices.
  • Two Way Communication:
    • Activate via push button
    • Allows for full duplex hands free com¬munication
  • Includes all necessary wiring (2 pair 10ft 22AWG) and connectors to con¬nect to AND IP endpoints
  • Cabling can be easily extended to reach further than the allotted 10ft
  • Program up to two extensions or phone numbers, primary extension is dialed upon pushing the button
  • The secondary extension is dialed when the button is pushed and held
  • Device Requirements
    • Compatible with AND devices of MAC address 20:46:F9:03:00:00 or higher.
    • Use with PoE or PoE+ power source
  • Call Button
    • Faceplate diameters are for installation with any standard back box
    • Faceplate is 16 gauge polished stainless steel
    • Button diameter is .6” (15mm)
    • Circuit SPST
    • Switch function momentary on
    • 2A at 48VDC power
    • 200000 cycles electrical life
    • -20 to 55°C operating temperature
    • IP65 ingress protection
    • Installation depth 1” (25.4mm)
    • Screw type terminals
  • AND-PIA-2 Interface Adapter
    • Use 18-22 AWG stranded or solid core wire pair to connect button to peripheral interface board
    • Vandal proof screws included to increase security
    • The peripheral interface adapter (AND-PIA-2) makes any combination of the following signals available via two “poke-home” connectors on the board:
      • Line Level Audio In
      • Line level audio out
      • 2 general purpose inputs
      • General purpose output relay
 
 

Suggested Products

by Bosch Conferencing and Public Address Systems