Signal Processing Systems : Extenders & Repeaters : Arista Corporation - RS-120-A07-RX

Rack/Wall Mount HDBaseT Extender Receiver

Model: RS-120-A07-RX

Standard 1RU height, 7" in depth
19" Rack mount or wall mount mounting option
Common rear output connectors for all modules - HDMI, RS-232, USB 2.0
HDBaseT transmitter supports PoE to power the receiver unit at remote location
Swappable modular design to obtain minimum maintenance and upgrade efforts requirement

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The RS-120-A07-RX Receiver has modular design and RS-120 was developed to minimize installation time and effort while providing a significant maintenance advantage by way of its ability to swap the receiver module rapidly. The RS-120-A07-RX receiver employs Arista's ARD-1006-A07-RX HDBaseT receiver module. It has a four port USB 2.0 hub and a 2-port 10/100Mbps Ethernet pass through hub, plus an RS-232 port and IR control. Serving as a system controller.

Standard 1RU height, 7" in depth
19" Rack mount or wall mount mounting option
Common rear output connectors for all modules - HDMI, RS-232, USB 2.0
HDBaseT transmitter supports PoE to power the receiver unit at remote location
Swappable modular design to obtain minimum maintenance and upgrade efforts requirement
HDBaseT extender supports 4K ultra high-resolution video, RS-232, USB, IR signals transmission and receiving
Swappable modular design providing maximum flexibility of configuration to fit highly dynamic event requirements

Extender Type - Audio
Extender Type - HDMI
Extender Type - RS232
Extender Type - USB
Extender Type - Other
Rackmountable - Yes
HDBaseT - Yes

Depth: 6.96 in
Height: 1.73 in
Width: 18.87 in
DC Voltage: 12 Volts
Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
Product Specifications:
•Video Bandwidth: 350MHz
•Video resolution: Up to 3840x2160
•Transmission: Cat5e/Cat6 cable
•Extension signal: Video, Audio, remote control, touch control, keyboard/mouse, Ethernet, Power
•RS-232 Signal Type: Full-duplex andbaud rate
•Input video signal: 1.2Vp-p
•Loop-Back: 1x HDMI Loop-Back at TX
•ESD Protection: Human body model - +/-15kV (air-gap discharge) and +/-8kV (contact discharge), Core chipset - +/-8kV
•PCB Stack-up: 6-layer board (impedance control - differential 100-ohm, single 50-ohm)
I/O Communication:
•Input: 1 x Remote IN (PSE)
•Output: 1x HDMI 2.0, 1x RS-232 4 x USB, 1x IR
•Rack Mount HDBaseT Extender Receiver
•Ethernet Hub: 2x LAN
•HDMI connector: HDMI female
•RS-232 connector: DB-9
•Keyboard and mouse connector: USB Type A
•USB connector: USB Type A
Storage Temperature: -20 to 60 °C
Relative Humidity: 0 to 95 %

RS-120-A07-TX - Rack/Wall Mount HDBaseT Extender Transmitter

RS-120-E01 - Rackmount Computer Module

HDBaseT Extender 218130 kb - Other

Project List

HDBaseT Extender 201910 kb - Other

Project List

Find a Dealer

Suggested Products

HDBaseT Extender Set with Wall-Plate Transmitter

by Vanco International

Pro AV/IT Integrator Series 4K 60Hz USB-C to HDMI Extender Kit up to 196ft

by Comprehensive Connectivity Company

Pro AV/IT Integrator Series HDBaseT 3.0 HDMI 4K 60Hz 4:4:4 with USB 2.0 , Audio, RS232 Extender Kit up to 330ft

by Comprehensive Connectivity Company