Signal Processing Systems : Combiners : Decimator Design - MD-QUAD V3

4-channel Multiviewer/Quad-Split with SDI and HDMI Outputs

Model: MD-QUAD V3

Horizontal and/or Vertical image flipping per window
Low cost miniature (3G/HD/SD)-SDI 1 to 4 channel Multi-Viewer or 4 to 1 input multiplexer
Custom Layouts with various standard layouts
16 Character UMD overlay per window with individual enables, custom positioning and size
8 Channel Audio Metering overlay per window with individual enables, custom positioning and size

More Product Information Below

Compare

Project List

Product Info

Tech Specs

The MD-QUAD V3 is 4-channel multiviewer/quad-split with SDI and HDMI outputs for 3G/HD/SD and custom layouts. Support both 3G level A and B on the input and output. Allowing conversion between 3G level A and B.

Horizontal and/or Vertical image flipping per window
Low cost miniature (3G/HD/SD)-SDI 1 to 4 channel Multi-Viewer or 4 to 1 input multiplexer
Custom Layouts with various standard layouts
16 Character UMD overlay per window with individual enables, custom positioning and size
8 Channel Audio Metering overlay per window with individual enables, custom positioning and size
Tallies can be applied to either Tally Boxes (Default) or Border
Tally boxes allows for up to 4 Tallies per window (Green, Red, Blue and Yellow)
Load and restore Custom Layouts
Fast switching between inputs using Full-Screen scaling
Selectable output format in both Full-Screen and Multi-Viewer mode
Low latency buffering for each input allowing non-synchronous inputs
Linked (3G/HD/SD)-SDI and HDMI outputs
4 x (3G/HD/SD)-SDI inputs with auto detection (4 Formats supported in total)
Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
Variable aspect ratios per window
Pass-Through mode allowing any of the 4 inputs to be selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs
An extensive selection of user controllable functions via a easy to use rotary encoder for menu selection
LEDs and a push button can then be used for status and control
USB port for control and updates
Locking DC Power Socket
5 GPI on standard RJ-45 connector for Tallies and Remote Switching
RS422/485 is also include on the same RJ-45 connector for Dynamic UMD and Tallies via TSL protocol
The following is included with the unit: Power Supply, HDMI Cable, USB Cable and Mounting Bracket

Combiner Type - Other

Number of Channels: 4

Find a Dealer

Suggested Products

8K HDMI 2x2 Switching Splitter

by Vanco International

HDMI 2.0 Splitter with 1 HDMI Input and 2 HDMI Outputs

by Alfatron Electronics, Inc.

HDMI Splitter with 1 Input and 4 Outputs

by Ethereal