Earthworks, Inc. - IMR12-B
earthworks
Request
More Information
All Products
from this brand

12" Rigid Center Gooseneck Installation Microphones

Rigid center gooseneck microphones for permanent tabletop installation for conferencing and other speech applications
Series: Installation
Model: IMR12-B
  • 30kHz flat frequency response optimized for speech
  • No spotlighting
  • Uniform frequency response on or off axis
  • More gain before feedback
  • Picks up almost no sound from the rear of the microphone
Project List
Product Info
Tech Specs

The Earthworks IMR Series rigid center gooseneck microphones are designed for permanent installation in tabletops for conferencing and other speech applications.

Performance

When capturing every word is critical, the IMR microphones are the most reliable miking solution. Optimized for speech, the IMR microphones feature a flat frequency response out to 30kHz that delivers the highest level of speech intelligibility and articulation. This means less straining to understand the words being spoken due to poor audio quality, so more time can be spent understanding the message being transmitted.   

Whether speaking directly on-axis or to the sides of the microphone, the IMR microphone always reproduces the speaker’s voice with incredible clarity and intelligibility. This wider coverage also means that fewer Earthworks microphones are required to properly cover a conference room, cutting down on the number of channels of DSP, cables and other ancillary equipment required for the system. Compatible with all DSP systems that provide 24-48V phantom power, the IMR microphones can easily integrate into existing system designs or new installations.

Construction

Designed with aesthetics in mind, the IMR microphones feature a slim 0.375“ (9.5mm) gooseneck with rigid center that allows precise positioning of the microphone for optimal coverage. The gooseneck flexes on both ends, however the center is rigid, providing a more polished appearance when re-positioning the microphone. The microphone flange measures just over 1.4 inches (36.5mm) wide and 0.125 inches (3.2mm) tall, mounting flush into the tabletop or ceiling for a low profile appearance.

  • 30kHz flat frequency response optimized for speech
  • No spotlighting
  • Uniform frequency response on or off axis
  • More gain before feedback
  • Picks up almost no sound from the rear of the microphone