hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Gilderfluke & Company, Inc. - Tester-J6

Digital Output Wiring Tester

Model: Tester-J6

  • Thirty-two switches simulate the digital outputs from, any Gilderfluke & Co. digital output card (Br-ZBrick, Br-MultiBrick32)
  • Green LEDs clearly show each digital output
  • If an output is shorted, then a red LED will turn on instead of the normal green LED to indicate a wiring problem. All outputs are PTC circuit breaker protected from short circuits and damage
  • Digital outputs that are shorted to their neighbors can easily be seen (two LEDs are turned on)
  • Four ‘Power’ outputs on the J6/A connector are PTC circuit breaker protected
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Digital output wiring tester. Through the years we have found that when there is a problem with a system during installation, that most times an output wiring problem caused it. These testers can be used during a new installation or on any existing show to test for wiring problems.

The Tester-J6 card will plug in place of a digital output card (Br-ZBrick or Br-MultiBrick32). The Tester-J6 sends open collector switch to ground signals to simulate any digital output card.

  • Thirty-two switches simulate the digital outputs from, any Gilderfluke & Co. digital output card (Br-ZBrick, Br-MultiBrick32)
  • Green LEDs clearly show each digital output
  • If an output is shorted, then a red LED will turn on instead of the normal green LED to indicate a wiring problem. All outputs are PTC circuit breaker protected from short circuits and damage
  • Digital outputs that are shorted to their neighbors can easily be seen (two LEDs are turned on)
  • Four ‘Power’ outputs on the J6/A connector are PTC circuit breaker protected
  • The indicator LEDs clearly show each ‘Power’ output
  • Any shorts on the ‘Power’ outputs are indicated by a red LED
  • Runs on any voltage from 9 to 24 vdc
 
 

Suggested Products