30-band Square One Graphic Equalizer

Model: Square ONE Graphic

45mm faders with integral dust guards, long-throw faders for maximum accuracy and resolution
Signal present and clip LEDs, maximum input capability of +22dBu
Auto voltage-sensing, operates anywhere between 100 to 240V plus or minus 10%
Continues to pass audio in the event of power failure
Roadworthy 3U steel chassis, designed to withstand the rigours of the road

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

30-band Square one graphic equalizer. Continues to pass audio in the event of power failure. Eight channels of flexible, configurable, high-performance dynamics processing in one 3U package. The right brand, the right combination, the right investment, every time.

45mm faders with integral dust guards, long-throw faders for maximum accuracy and resolution
Signal present and clip LEDs, maximum input capability of +22dBu
Auto voltage-sensing, operates anywhere between 100 to 240V plus or minus 10%
Continues to pass audio in the event of power failure
Roadworthy 3U steel chassis, designed to withstand the rigours of the road
’Q' or bandwidth of square ONE's filters is proportional to gain applied and so gives increasing focus on real problem frequencies
Square ONE graphic's LPF is fixed at 12kHz, optimal for stage monitoring applications, both loudspeaker and IEM systems, and will increase available headroom as well as providing HF drivers with some thermal protection against ultrasonic frequencies

Equalizer Type - Graphic Equalizer
Equalizer Input Connector - 1/4" TRS
Equalizer Input Connector - XLR
Equalizer Output Connector - 1/4" TRS
Equalizer Output Connector - XLR

Height: 133mm (5.25 inch) - 3U High
Width: 482mm (19 inch)
Depth: 205mm (8 inch)
Depth: 8.07 in
Height: 5.24 in
Width: 18.98 in
Product Weight: 9.70 lbs
Shipping Weight: 11.90 lbs
AC Voltage: 240 Volts
Active Power: 25 Watt
Impedance: 600 ohm
Eq Out: +/-0.5 dBu
Eq In (flat): +/-0.5 dBu
Distortion (THD+N): < 0.005% (at 1kHz, +4dBu)
Noise Floor: <-90 dBu
Overload Indicator: +19 dBu
Gain: infinity to +6 dBu
Minimum Load Impedance: 600 ohms
Source Impedance: <60 ohms
Centre frequencies: BS EN ISO 266:1997 25Hz to 20kHz (1/3 octave)
Tolerance: +/-5%
Maximum Boost/Cut: +/-12 dB
High Pass Filter Slope: 12 dB/Octave
Low Pass Filter Slope: 12 dB/Octave

Square ONE Dynamics - Square One 8-channel Dynamic Processor

Square ONE Splitter - 8-input/24-output Analogue Square One Audio Splitter

Klark Teknik - Full Line Brochure.pdf 4559 kb - Brochure

Project List

Klark Teknik - Show Command Brochure.pdf 1039 kb - Brochure

Project List

Request Quote

Find a Dealer

Find a Distributor

Suggested Products

3 Band Equalizer - Line Level

by RDL, Radio Design Labs

Three Band Equalizer with Knobs - Terminals

by RDL, Radio Design Labs

Loudness Equalizer - Use with VCA

by RDL, Radio Design Labs