The XTENDEX® HDMI Extender via Fiber Optic Cable locates an HDMI display up to 980 feet (300 meters) away from a video source using a single SC multimode fiber optic strand. Each extender consists of a transmitter that connects to a video source and a receiver that connects to a display.
For detailed product information visit http://www.networktechinc.com/fiber-hdmi-extender.html
Signal transmission via single-strand multimode SC fiber optic cable – no RF interference.
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
Compact and durable design — allowing for easy connection and placement.
HDMI features supported: 12-bit Deep Color, Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, and DTS.
Bandwidth up to 3.5 Gbps per channel.
Supports the DDC2B protocol.
Supports full 60fps video.
No software to install.
Cables can be installed in conduit prior to extender installation.
One male DisplayPort connector. One simplex SC fiber optic port for sending/receiving high definition video/audio signals, and DDC signal.
One male HDMI connector.
One simplex SC fiber optic port for sending/receiving high definition video/audio signals and DDC signal.
Transmitter: powered from attached video source. Receiver: 110 or 220 VAC at 50 or 60 Hz via AC adapter. (US, EURO, UK, or AUS AC adapter included.)
3.33x1.31x0.46 in (85x33x11 mm) with 8.5-inch (216-millimeter) male HDMI cable attached (local and remote unit)
Regulatory Compliance :
CE, FCC, UL
Use a simplex SC multimode 50-micron fiber optic cable (FIBER-S-SCSC-50-xxM) or 62.5 micron fiber optic cable to extend the receiver from the transmitter up to 980 feet (300 meters).
Cables not included.
Operating temperature: 32 to 122°F (0 to 50°C).
Storage temperature: -4 to 158°F (-20 to 70°C).
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 up to 980 feet (300 meters). Supports full 60fps video.
Max Distance :
980 feet (300 meters) over 50µm or 62.5µm multimode SC fiber optic cable.