Pole Mount Tray

Series:

Model: PM-1T

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers (for stereo operation) and two PS-24U2 Power Supplies. There is adequate space remaining for associated STICK-ON and TX series modules. If two FP-PA20 type amplifiers are not used, multiple STICK-ON, FLAT-PAK and TX series modules may be mounted. Examples of typical tray-mounted modules may include STICK-ON series power amplifiers. Headphone amplifiers, VCA modules, line amplifiers, video amplifiers or distribution amplifiers may also be mounted.

Related Mount Product Types - Other

Depth: 10 in
Height: 2.50 in
Width: 11.20 in
Shipping Weight: 3.80 lbs

FP-ALC1 - Automatic Level Control - Mono - Terminals

FP-ALC2 - Automatic Level Control - Stereo - Phono Jacks

FP-AVDA4 - Stereo Audio/Video Distributor-1x4, Phono Jacks

FP-BUC2 - Balanced to Unbalanced Converter-2 channel

FP-CH8 - Chime Generator

FP-DFC2 - Digital Audio Format Converter (24/192)

FP-MP1 - Studio Quality Mic Preamp w/ Phantom - Terminals & XLR

FP-MPA2 - Dual Mic Phantom Adapter 12, 24, 48 V - XLR

FP-MR2 - FP-MR2 Message Repeater

FP-MX4 - 4 Mic or Line Input Mixer - Mic and Line Out

FP-PA20 - Power Amplifier - 20 W 8 ohms

FP-PA20A - 20 W Mono Audio Amplifier, 70 V or 100 V

FP-PA20B - 20 W Mono Audio Amplifier 25 V

FP-PEQ3 - 3 Band Parametric Equalizer, Terminal blocks and RCA jacks

FP-SPR1 - SPDIF Repeater / Amplifier

FP-UBC2 - Unbalanced to Balanced Converter - 2 Channel

FP-UBC6 - Unbalanced to Balanced Converter - 6 Channel

FP-VDA4 - NTSC/PAL Video Distribution Amp - 1x4 - BNC

ST-CL2 - Line Level Compressor/Limiter

ST-CX2 - Two Band Active Line-level Crossover

ST-CX2S - Subwoofer Crossover Filter

ST-GCA3 - Gain Control Amplifier - Line Level

ST-HP3 - 300 Hz and 500 Hz High Pass Filter

TX-10B - Bridging Input Transformer

TX-1A - Adjustable Balanced to Unbalanced Transformer.

TX-1W - Music on Hold Amplifier - 1 Watt

TX-70A - Unbalanced Line Output Speaker Level Input Interface

TX-8i - Headphone Isolation Transformer

TX-A2 - Audio Converter - Balanced to Unbalanced

TX-A2D - Dual Audio Converter - Balanced to Unbalanced

TX-AFC1F - Balanced to Unbalanced Audio Transformer

TX-AFC1M - Unbalanced to Balanced Audio Transformer RCA, XLR

TX-AT1 - 600 ohm 1:1 Audio Isolation Transformer

TX-AT1S - Audio Isolation Transformer with Suppression

TX-AVX - Automatic Video Switch, BNC

TX-J2 - Unbalanced Input Transformer - Unbalanced stereo inputs to summed balanced mono output

TX-LC2 - Unbalanced to Balanced Line Combiner

TX-LM2 - Line Level to Mic Level Transformer

TX-MVX - 2x1 Manual Rmt Controlled Video Switch, BNC

TX-MX2R - Audio Mixer / Distribution Amplifier

TX-PCR1 - Paging Controlled Relay

TX-PSD1 - Paging Sound Detector

TX-TPR3A - Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs

TX-TPR6A - Passive Single-Pair Receiver, Twisted Pair Format-A

TX-TPS1A - Active Single-Pair Sender, Twisted Pair Format-A

TX-TPS3A - Active Three-Pair Sender, Twisted Pair Format-A

TX-TPS6A - Passive Single-Pair Sender, Twisted Pair Format-A

TX-VCR - Video Controlled Relay - BNC

TX-VLA1 - Video Line Amplifier - Adjustable Gain and EQ

Find a Dealer

Find a Distributor