Pro AV Catalog

18.5" Deep Stand-Alone Floor Rack with Fixed Rails, 24RU (UL Listed)

The economical Atlas Sound 124-18 cabinet is 22 5/16" wide, 18 1/2" deep, and contains 24RU vertical panel spaces. The 124-18 cabinet includes one pair of 11 ga. CRS fixed mounting rails.
Series: 100
Model: 124-18
  • UL 1678 Listed
  • Five model heights available
  • Locking rear door offers right- or left-hand hinging capability
  • Up to 6RU (or combinations to 6RU) panel opening in top offers wiring convenience or fan panel cooling with optional EFP series fan kits
  • Increased opening in base facilitates wiring to conduit or below floor raceways
Add
Compare
Save to Project
Product Info
Tech Specs
Documents
Accessories
The 100 Series Cabinets are 18-1/2" deep, 22-5/16"" wide, and avail­able in five different RU heights, 21RU, 24RU, 35RU, 40RU and 44RU. The cabinets are welded 16 Gauge CRS and assembled for immediate use. Rear doors are hung with quick-release spring hinges which allow them to be rotated 180? for right- or left-hand opening. Rear door includes flush door handle and cylinder lock. See chart on back for appropriate Optional front door model numbers. If front door is ordered, it will be keyed differently than the rear door for security. The 100 Series Cabinet line offers several installer-friendly advantages, including a 6RU standard panel width opening in the cabinet top and conduit arrays. The top opening can be left open for wire access and/or ventilation, partially covered with the ISOPANEL™ for non-conductive cable access or closed using 2 stan­dard 5-1?4" (3 RU) panels. Top opening is also perfect for installing EFP Series fan. Conduit arrays are located on the top and bottom surface panels, as well as the top and bottom back flanges. Flange arrays consist of five knockouts, three 1" (25 mm) standard, and two, 1?2" (13 mm) 3?4" (19 mm) concentric. Surface arrays are comprised of 4 knockouts: two 1" (25 mm) standard knockouts and two 1?2" (13 mm) 3?4" (19 mm) concen­tric. Stamped, perforated vents are located on front, sides and rear door to allow for maximum air convection. Cabinets include one pair of 12-gauge, CRS fixed mounting rails tapped 10-32 and recessed 5?8" (16 mm). Rails are standard E.I.A. spacing. Cabinet surface is phosphate pre-treated for proper paint adhesion. Standard finish is textured black epoxy #962.
  • UL 1678 Listed
  • Five model heights available
  • Locking rear door offers right- or left-hand hinging capability
  • Up to 6RU (or combinations to 6RU) panel opening in top offers wiring convenience or fan panel cooling with optional EFP series fan kits
  • Increased opening in base facilitates wiring to conduit or below floor raceways
  • Functional 3RU blank panel (51/4") provided
  • Manufactured to E.I.A. standards
  • Includes perforated front, rear and side vents for heat dissipation
  • Pre-Drilled to accept M-1A cabinet mount IR repeater
  • 21RU heights, 18 1/2" depth
  • Fixed rack rails
  • The best value in the industry
  • Base, top panel, side panels, and rear door, fully assembled
  • Welded 16-gauge cold rolled steel (CRS) construction
  • Vented top, base, sides, and rear door
  • One pair of 12-gauge, CRS fixed mounting rails with hash marks to denote RU increments
  • Pre-Installed hardware for optional front door installation
  • 18 Conduit Knockouts
  • Solid, perforated, or plexiglas front door
  • Drawers, shelves, fans, and accessories
  • RCK-18 caster kit
  • Lacing bars and bus bars