CAMCO Vortex series amplifiers are supplied with a remote control facility as standard (Camco Amplifier Interface - CAI). The Tecton series can be upgraded for remote control via the use of the controller-module or a combined controller / network-module. The CAI interface is a cost efficient solution, which via a RJ11 connector handles all the amplifiers settings and status readings. Up to 32 amplifiers can be daisy chained together into a CAI network (blue lines on the illustration above). The EtherCAI module is a network-bridge between the CAI network (blue lines) and a standard TCP/IP & Ethernet network (orange lines) which together makes an EtherCAI network (blue + orange lines). Thus remote control is possible through LAN, WLAN and the Internet. Several EtherCAI modules can be connected to the same standard Ethernet router. Thus there is no upper limit to the number of amplifiers which can be remote controlled by a PC over an EtherCAI network. The remote control software provides a user-friendly and intuitive graphical user interface, which enables remote control of all amplifiers connected to the EtherCAI network. All registered users of CAMCO amplifiers can receive CAMCO’s remote control software free of charge. Please contact your CAMCO dealer for further information. The CISUS software provides access to all the amplifiers front plate read outs, amongst others: Signal. Clip and Protect. Additionally the amplifiers mute function is also accessible. Furthermore CISUS offers peak meter readouts of the output stages voltage and current as well as dynamic readout of the amplifiers temperature. The CISUS remote control software offers different views of amplifiers in a group, for easy overview and control. Illustrated here vertical, horizontal and rackview of the same amplifier group. Amplifier groups and views are easy to define by drag’n’drop functionality in the network tree (upper left corner).