Audio Production Equipment : Amplifiers (Audio) : Kramer Electronics Australia - PA-240Z

240W High-performance Power Amplifier

Model: PA-240Z

Part #: 13-80455130

Single Channel of 240W into a 70V/100V line
2 channels of 120W into 4/8-ohm
Balanced stereo line level output
Individual inputs mix, EQ and HPF per output
Built-in 3 band parametric EQ

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

PA-240Z is a high-performance Hi-Z (70V/100V) and Lo-Z (4/8-ohm) controllable power amplifier featuring balanced and unbalanced inputs and line-level output. This powerful amplifier is suitable for large-scale applications.

Single Channel of 240W into a 70V/100V line
2 channels of 120W into 4/8-ohm
Balanced stereo line level output
Individual inputs mix, EQ and HPF per output
Built-in 3 band parametric EQ
Auto-standby with adjustable threshold
Controllable via RS-232 and IP
Over current and over heat protections
Powerful, yet compact and lightweight
Applications:
Medium to large meeting rooms
Auditoriums and lecture halls
Court rooms
Retail stores and shopping centers
Hotel lobbies
Transportation hubs

Amplifier Type - Power Amplifier
Rackmountable - Yes
Spec Sheet available - Yes

Controls: Screw trimmer amplifier attenuator, IP and RS-232
Depth: 163.07 mm
Dynamic Range: 119 dB
Height: 43.69 mm
Impedance: 8 ohm
Sensitivity: -10 dBV
Width: 214.63 mm
Power Handling: 240 Watt
Audio 2nd Harmonic: 0.08% at 75W RMS at 4-ohm, 6.67kHz
Maximum Voltage Gain: 26dB SE/32dB BTL
Amplifier Type: Class D
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Signal to Noise Ratio: 80 dB
Number of Inputs: 2
Number of Outputs: 2
Total Harmonic Distortion + Noise (THD+N): 0 %
AC Voltage (Minimum): 85 Volts
AC Voltage (Maximum): 265 Volts
Shipping Width (with packaging): 351.03 mm
Shipping Height (with packaging): 71.88 mm
Shipping Depth (with packaging): 212.09 mm
Inputs:
•1 unbalanced stereo on a 3.5mm connector
•1 balanced stereo +4dBu/10k-ohm on a 5-pin terminal block
Outputs:
•1 balanced stereo line level on a 5-pin terminal block
•1 stereo or 1 mono speaker output on a 4-pin large terminal block
Output Power:
•2 x 120W at 4-ohm or 8-ohm
•1 x 240W at 70V or 100V
Total System Efficiency: 89.5 %
Number of Channels: 2
Number of Watts Per Channel: 120 Watt

C-A35M/2IRE - 3.5mm to Dual IR Emitter Cable

C-A35M/A35M - 3.5mm Stereo Audio Cable

CP-A35M/A35M - 3.5mm Audio Plenum Cable

Power Amplifier 1100522 kb - Other

Project List

Power Amplifier 123578 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

DM NAX 4+1 Zone Streaming Amplifier

by Crestron Electronics, Inc.

8-Channel Power Amplifier, 75W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V

by Crestron Electronics, Inc.

8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 100V, International, 220-240V

by Crestron Electronics, Inc.