16-channel Intelligent Amplifier
Model: AmpTraXX
- No Moving Parts
- Compact Size
- 16 Channels x 25W Each
- Bridge-able Outputs for 50W Operation
- DSP
AmpTraXX is the perfect solution for any vehicle-based system that requires up to 16 amplified, DSP configured audio channels. Applications include theme park ride vehicles, multi-lingual transportation systems, and tour buses.
Each AmpTraXX channel can provide up to 25W RMS into 8 ohms and independent DSP capability, including a 9-band EQ, dynamic range and compression control (DRC), as well as gain and stereo/mono mixing capability. Channel pairs can also be bridged to provide 50W if more power is required.
AmptraXX is programmed using an easy to use software included with each unit. Setup is simple: select a channel, click on the DSP element you want to program and type in the desired frequency or gain settings.
All settings are non-volatile, and the USB and serial interfaces can also be used for onthe- fly volume and mute adjustments for installations equipped with a control system. AmpTraXX can even be controlled directly from a RideTraXX, eliminating the need for an external control system altogether.
Each amplifier is completely protected against short-circuit and overdrive events, and all inputs and outputs are on vibration-resistant, locking connectors to guarantee years of maintenance-free operation. A dual-color LED constantly displays the status of the unit.
- No Moving Parts
- Compact Size
- 16 Channels x 25W Each
- Bridge-able Outputs for 50W Operation
- DSP
- Stereo/Mono Mixing
- Vibration Resistant Hardware
- Energy Efficient Design
- Operating Temperature (Maximum): 100.40 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Certifications: CE, UL
- Impedance: 10000 ohm
- Number of Channels: 16
- Signal to Noise Ratio: 106 dB
- Total Harmonic Distortion + Noise (THD+N): 0.07 %
- Active Power: 400 Watt
- DC Voltage: 26 Volts
- Depth: 7 in
- Height: 1.50 in
- Width: 7 in
- Product Weight: 4 lbs
- Power Output Per Channel:
- 25W; Power input 24VDC
- 15W; Power input 18VDC
- 9W; Power input 12VDC
- 50W (8 Channels, bridged pairs); Power input 24VDC
- Crosstalk: -69 dB
- Input Type: Unbalanced (2x Molex Mini-Fit; Female RCA breakout cable included)
- Maximum Level SOA: 4 volts p-p
- Output Connectors: 2x Molex Mini Fit (16GA wired breakout harness included)
- On/Off Transient Muting: Yes, active “depop” circuitry built-in
- Short Circuit Protection: Over-current
- Thermal Characteristics: Automatic over-temperature shutdown
- Signal Present Indicators: 0.003 volts p-p, Green LEDs
- Power/Status Indicator: Front panel red-green LED
- Serial Connector: DB9 Male & Phoenix screw terminals
- Serial Protocol: EIA232 38400 N,8,1
- Serial Control Capabilities: Individual channel volume, DSP Configuration, etc.
- Volume/EQ Set: Stores the current volume and EQ levels; Switchable on-off
- Volume Adjust Disable: Disables front volume controls; Switchable on-off
- Under/Over Voltage Protection: <7 or >26 VDC
- Input Current/Connector: 22A Max/Molex 0039301040
Suggested Products
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com