Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4 Channel, 4800 W, Dedicated Installation Amplifier
Series: C-Series
Model: C 48:4
Part #: 992230011
- Unprecedented power density
- Four Channels
- Lo-Z or Hi-Z (70V/100V)
- Patented Class TD amplifier topology
- Voltage Peak Limiter (VPL)
Product Info
Tech Specs
Related Products
Documents
The C 48:4 is the second largest amplifier in the C Series family, delivering an impressive 4 x 1200 W at 4 ohms packed into a 2U chassis.C Series amplifiers are uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL), which allows the output to be optimized for any loudspeaker load – whether a single large subwoofer or a series of small 100/70 V loudspeakers. VPL works in combination with adjustable input gain to achieve maximum headroom regardless of input levels or output impedances.Every C Series is ready for the NomadLink® network right out of the box. With NomadLink®, key amplifier parameters are displayed via DeviceControl PC software, and remote control of channel mutes and power on/off is under network control.
- Unprecedented power density
- Four Channels
- Lo-Z or Hi-Z (70V/100V)
- Patented Class TD amplifier topology
- Voltage Peak Limiter (VPL)
- Phoenix-type input connectors
- Screw terminal output connectors
- Comprehensive protection and warning
- Efficient and uniform Intercooler® cooling
- NomadLink® network ready
- Amplifier Signal Type - Audio
- Amplifier Type - Other
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Number of Channels: 4
- Number of Watts Per Channel: 1200 Watt
- Power Handling: 4800 Watt
- Rack Units (Height): 2
- Signal to Noise Ratio: 112 dB
- Total Harmonic Distortion + Noise (THD+N): 0.10 %
- AC Voltage: 265 Volts
- Current Draw: 5 Amps
- Depth: 13.50 in
- Height: 3.46 in
- Width: 19.02 in
- Product Weight: 26.46 lbs
- Color: Black
- THD at 1 kHz and 1 dB below clipping: <0.05%
- Channel separation (Crosstalk) at 1 kHz: >70 dB
- Frequency response (1 W into 8 ohms) +0/-3 dB: 6.8 Hz - 34 kHz
- Input Common Mode Rejection, CMR: 50 dB
- Output impedance @ 100 Hz: 30 mOhm
- VPL, selectable per ch. 3): 141, 118, 100, 85, 71, 59, 50, 42 V
- VPL, when bridged 3) 1): 282, 236, 200, 170, 142, 118, 100, 84 V
- Voltage Peak Limiter mode (per ch.): Hard / Soft
- Amplifier gain selectable (all channels): 23, 26, 29, 32, 35, 38, 41, 44 dB
- Default gain: 35 dB
- Level adjustment (per ch.): Front-panel potentiometer, 21 position detented from -inf to 0 dB, hidden behind security panel/dust filter grille
- Input connectors (per ch.): 3-pin Phoenix, electronically balanced
- Output connectors (per ch.): Barrier strip 2-pole screw terminals
- Output bridge mode: A+B and/or C+D, inputs A and C are input source
- NomadLink® network: On board, 2 x RJ45 connectors
- Intelligent fans (on/off): Yes, depending on presence of output signal
- Power on/off and Remote enable on/off: Individual switches on front-panel
- Cooling: Two fans, front-to-rear airflow, temperature controlled speed
C484datasheet.pdf
828 kb
- Data Sheet
C-Series_Brochure.pdf
5772 kb
- Brochure
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Lab.gruppen
Model: C 48:4
Request more information from a dealer near you
close
Request more information from a dealer near you