Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
ST 2110 Signal Generator & Diagnostic Appliance
Model: MTXVero
- ADJUSTABLE REFERENCE SENDER:
- Matrox VERO provides an adjustable ST 2110 reference sender that allows users to test receiver compliance in ideal circumstances, as well as receiver resilience in worst-case scenarios.
- Packet timing can be set to simulate a variety of senders, including narrow, narrow linear, and wide.
- User-defined RTP timestamp offsets can simulate network delays and test a receiver’s ability to adapt to them.
- PCAP RECORDING:
Product Info
Tech Specs
Documents
Matrox VERO is an essential tool for broadcasters, system integrators, and manufacturers of ST 2110 devices and environments. Matrox VERO integrates the components required to allow users to confidently validate ST 2110 devices for compliance before deployment. Matrox VERO combines an adjustable signal generator, a PCAP recorder, and signal diagnostics integrating EBU LIST into a single appliance with an intuitive, web-based GUI.
- ADJUSTABLE REFERENCE SENDER:
- Matrox VERO provides an adjustable ST 2110 reference sender that allows users to test receiver compliance in ideal circumstances, as well as receiver resilience in worst-case scenarios.
- Packet timing can be set to simulate a variety of senders, including narrow, narrow linear, and wide.
- User-defined RTP timestamp offsets can simulate network delays and test a receiver’s ability to adapt to them.
- PCAP RECORDING:
- Diagnosing ST 2110 networks requires the ability to capture raw, high-bandwidth Ethernet traffic in PCAP format for analysis.
- Network traffic – especially when it contains UHD video flows – cannot be easily captured to disk as raw data without timing errors and severe packet loss.
- Using extremely precise, hardware-based timestamping along with hardware-accelerated transfers, Matrox VERO can capture a perfect replica of network traffic in a PCAP file for ST 2110 diagnosis.
- CONVENIENT EBU LIST® INTEGRATION:
- Analyzing ST 2110 environments requires multiple tools. Matrox VERO provides all the necessary components required to successfully diagnose ST 2110 setups.
- Recognizing the contributions of the European Broadcasting Union Live IP Software Toolkit (EBU LIST®) – a widely-respected and essential tool for diagnosis.
- Matrox VERO also comes with a pre-installed copy for user convenience and access.
- HD/FULL HD/UHD:
- Matrox VERO provides a full range of video resolution support, including HD, Full HD, and UHD up to 60 FPS.
- Matrox VERO features two independent output channels, each capable of generating one video, up to four audio, and one ancillary data flows.
- Each of the two channels can also be dedicated to independent video resolutions and frame rates, which allows ST 2110 equipment manufacturers to verify multiple resolutions simultaneously, including support of ST 2022-7.
- FILL & KEY:
- Computer graphics are essential for broadcast applications.
- While key signals have traditionally been transported as video, ST 2110 provides a pixel group construction specifically dedicated to a key channel.
- In order to help test these graphic-intensive workflows, Matrox VERO supports the generation of fill and key ST 2110 flows for HD and UHD.
- SIMPLE CONFIGURATION:
- Matrox VERO comes with a number of predefined ST 2110 profiles, including all of the necessary video formats, and associated audio and ancillary data flows that are most commonly used in the broadcast industry.
- Matrox VERO also allows users to select from available preset parameters or customize profiles based on their own use cases.
- An unlimited number of unique profiles can be easily saved to the device, and each profile can be loaded instantly without the need to re-enter data.
- INTUITIVE WEB-BASED INTERFACE:
- Matrox VERO is a web-based application with an easy to use interface.
- It is designed to work with any web browser without additional software installation requirements.
- By simply entering the IP address of the Matrox VERO device in their web browser’s address bar, users can easily generate ST 2110 streams and operate diagnostic tools from anywhere on the network using any PC, tablet, or mobile device.
- Signal Generator Type - Video
- Tester Format - Standalone Component (Box)
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 95 F
- Operating Temperature (Minimum): 50 F
- Product Weight: 27.38 lbs
- Product Specifications:
PRODUCT
Part Number: MTXVero
Form Factor: Rack-mountable: 1U (horizontal)
CONNECTIVITY
Network:
2x SFP28 cages for ST 2110 interface
•10 GbE IEEE 802.3ae (10GBASE-SR/LR)
•25 GbE IEEE 802.3 by (25GBASE-SR/CR/CR-S)
•25 GbE IEEE 802.3cc (25GBASE-LR)
Dedicated RJ-45 management network interface (1GbE)
Supported Media Standards and Specifications:
SMPTE ST 2110 (-10, -20, -21, -30, -31* and -40), ST 2022-7, and ST 2059-2
AMWA NMOS IS-04 and IS-05
*This feature will be available in a future release.
Control and Management:
Web-based interface compatible with any browser, including mobile devices
REST-based API for easy automation*
*This feature will be available in a future release.
SIGNAL GENERATOR
Video:
According to SMPTE ST 2110-20 and ST 2110-21
• 3840x2160p @ 50, 59.94 and 60 Hz
• 1920x1080p @ 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 Hz
• 1920x1080i @ 25, 29.97M and 30 Hz
• 1280x720p @ 50, 59.94 and 60 Hz
ITU-R BT.709 and BT.2020
Audio:
According to SMPTE ST 2110-30
• ST 2110-30 Classes A, B & C
• 1 to 64 channels per flow
• PCM 24bit @ 48 kHz
• Packet times of 125 µs or 1ms
Ancillary Data:
According to SMPTE ST2110-40
• ATC
• AFD and bar data
PTP:
ST2059-2 compliant
Supported on each SFP for redundancy
Adjustable Parameters:
User presets for SMPTE ST 2110-21 sender types: N (Narrow), NL (Narrow Linear), W (Wide), or custom
Custom packet timing for granular control of number of packets present in the Network Compatibility Model (up to and beyond CMAX) and Virtual Receiver Buffer Model (up to and beyond VRXFULL)
User-controllable RTP timestamp offset per flow
CAPTURE AND ANALYSIS
PCAP Recording*:
Aggregated capture throughput of up to 28Gbps with hardware-based timestamping
Available on both ST 2110 interfaces (primary, redundant or both simultaneously)
Input routing of sources through:
• Manual settings (IGMP)
• NMOS IS-05 control
• SDN control
Auto detection of ST 2110 flows on inputs
*This feature will be available in a future release.
EBU Live IP Software Toolkit (LIST©):
Open source ST 2110 analysis toolkit
Deep packet inspection for ST 2110 specification compliance
Pre-installed for convenience
PHYSICAL
Product Dimensions:
22.73 (D) x 18.97 (W) x 1.68 (H) inches
57.75 (D) x 48.2 (W) x 4.28 (H) cm
Unit Weight: 27.38 lbs / 12.42 kg
Power Supply Unit:
AC Line voltage: 100-240 V a.c.
AC Frequency: 50-60 Hz
AC Input current (low/high): 3.7 A/ 7.4 A
Wattage: 550 W
HARDWARE & SOFTWARE
Hardware Included:
Matrox Vero appliance with ST 2110 signal generator, PCAP capture, and stream analysis.
Includes racking kit and power cords (US, EUR, UK)
ENVIRONMENTAL
Operating Conditions:
Temperature: 10 to 35 degrees Celsius
Humidity: 20% to 80% non-condensing
matrox_vero_datasheet_2020.pdf
1737882 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Matrox Graphics Inc.
Model: MTXVero
Request more information from a dealer near you
close
Request more information from a dealer near you