MXNet 1G Evolution II Encoder
Model: AC-MXNET-1G-EV2-TAA
- Native 4K/60fps Support
- High Bitrate Multi-channel Audio Support - Dolby Atmos and DTS:X for IMAX Enhanced are now supported.
- Improved Preview Thumbnails - First generation MXNet supported static thumbnails with 960X540 pixel resolution, turning over every 10 seconds. EVO II supports third-party media sub-streaming through an HTTP address, at an improved pixel resolution of 1024
- Data Status Window - A forward-facing, built-in mini OLED screen displays information critical to device set up, system troubleshooting, or standard operational status. Custom name an EVO II AC-MXNET-1G-EV2 with up to twelve allotted character slots for e
- Control Signal Routing - IR and RS-232 control signal routes that have been mapped with MXNet Mentor software direct commands to downstream EVO II decoders through the AC-MXNET-1G-EV2. Any EVO II decoder connected to an MXNet system switch may be eligible
This is the TAA Compliant of the AC-MXNET-1G-EV2 represents the next step forward on the evolutionary path of the MXNet Platform, encompassing an industry-first, holistically integrated approach to AV over IP video distribution from a solo manufacturer. AVPro Edge’s exclusive MXNet Platform offers the only proprietary, hyper-optimized AV over IP ecosystem of network-based encoders, decoders, and managed switches guided from a centralized control unit by MXNet Mentor, our in-house engineered system setup and control solution.
AC-MXNET-1G-EV2, an Evolution II Encoding/Transmitting device, incorporates a newly designed AVPro Edge application-specific integrated circuit (ASIC) that introduces an improved software-based video encoding/decoding engine into the IC for enhanced video processing. Refinements to the IC include native support for 4K/60fps 4:4:4 signals (RGB and YCbCr @10- and 12-bit), plus extended audio capabilities to support high bitrate multi-channel formats, including Dolby Atmos and DTS:X for IMAX Enhanced soundtracks. All MXNet first-generation encoder features are retained for use with the AC-MXNET-1G-EV2.
As a member of the AVPro Edge family of AV over IP products, an AC-MXNET-1G-EV2 is a gateway where a signal enters the MXNet Ecosystem, connected with category cable (AVPro Edge strongly encourages CAT-6a infrastructure for all MXNet system deployments; however, for MXNet 1G, Cat-5e will comfortably transport MXNet 1G data signals) or fiber optic cabling, to an MXNet switch or any compatible multicast-capable managed L3 network switch.
A connected HDMI source will have audio and video signals encoded into a multicast data format for routing to any AC-MXNET-1G-EV2 system endpoint connected to the same MXNet switch. Encoded HDMI source signals up to native 4K/60fps 4:4:4 with Dolby Vision, HDR10, HDR10+, and HLG are passed to EVO II downstream AC-MXNET-1G-DV2 decoders, with RS-232 serial pass-through, IR control or USB signals also transportable inside encoded data packets.
Encoding is executed using an optimized JPEG 2000 codec, which parses data at managed flexible rates to minimize bitrate errors (200Mbps for 1080p content, 300Mbps for 4K/30fps content, peaking at 850Mbps for 4K/60fps content). Frame-syncing Genlock is supported, with latency near zero and visually imperceptible. The AC-MXNET-1G-EV2 runs quietly and remains cool during operation, utilizing a fan-less design featuring chip-top heatsinking to efficiently disperse heat while limiting power consumption at typically 7 watts or less for stability and device longevity.
- Native 4K/60fps Support
- High Bitrate Multi-channel Audio Support - Dolby Atmos and DTS:X for IMAX Enhanced are now supported.
- Improved Preview Thumbnails - First generation MXNet supported static thumbnails with 960X540 pixel resolution, turning over every 10 seconds. EVO II supports third-party media sub-streaming through an HTTP address, at an improved pixel resolution of 1024
- Data Status Window - A forward-facing, built-in mini OLED screen displays information critical to device set up, system troubleshooting, or standard operational status. Custom name an EVO II AC-MXNET-1G-EV2 with up to twelve allotted character slots for e
- Control Signal Routing - IR and RS-232 control signal routes that have been mapped with MXNet Mentor software direct commands to downstream EVO II decoders through the AC-MXNET-1G-EV2. Any EVO II decoder connected to an MXNet system switch may be eligible
- USB and KVM Support - A USB 2.0 Type-B female Host connection resides on every AC-MXNET-1G-EV2. MXNet Mentor software enables easy routing configuration for bi-directional USB signals from a designated Host Encoder to a downstream decoder with a connected
- USB video downstream processing has been improved, supporting resolutions up to 1920x1080p @ 30Hz.
- External Device Light Control - Light emission from an AC-MXNET-1G-EV2 may be controlled via MXNet Mentor. Any status light, including network link LEDs and the OLED Data Window may be optionally disabled to prevent unwanted distraction, enabling discreet
- Netgear Support - MXNet’s engineers have worked together with Netgear to ensure their switches work with our line of encoders and decoders. To make installing MXNet with Netgear switches even easier, Netgear has developed an “AVPro Edge Profile.” Once thi
- Includes:
- AC-MXNET-1G-E (Encoder/Transmitter Device)
- 1 x IR Emitter
- 1 x IR Receiver
- 2 x Mounting Brackets
- 4 x Screws for Mounting Brackets
- 1 x 3-Pin Terminal Block
- 1 x 5-Pin to 2ch Audio Extraction Cable
- Decoder or Encoder Signal Type - Audio
- Decoder or Encoder Signal Type - Video
- Rackmountable - Yes
- TAA Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Color: Black
- Warranty (Length/Type): 10 Years
- Certifications: CE/FCC/UL
- Operating Temperature (Maximum): 122 F
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Operating Temperature (Minimum): 23 F
- Active Power: 9.70 Watt
- Current Draw: 0.80 Amps
- Depth: 4.72 in
- Height: 0.78 in
- Shipping Depth (with packaging): 2.13 in
- Shipping Height (with packaging): 7.09 in
- Shipping Width (with packaging): 12.20 in
- Width: 7.84 in
- Product Weight: 1.41 lbs
- Shipping Weight: 1.87 lbs
- Video Codec: Proprietary Codec based on M-JPEG
- Audio Codec: Proprietary Codec
- Latency: 16ms at 60Hz
- Streaming Protocols: TCP, UDP, IP, IGMP-V2
- Copy Protection: HDCP 2.2 and earlier
- Signal Type: DVI 1.0, HDMI 2.0b
- Video Resolution: 720p at 50/60Hz; 1080p at 24, 50 and 60Hz; 4K at 50/60Hz 4:4:4; 4K at 30Hz 4:4:4; 4K at 60Hz 4:2:0;4:2:2 4K at 24Hz 4:2:0/4:2:2 [Ultrawide Support]
- CHROMA SUBSAMPLING: 4:4:4, 4:2:2, 4:2:0, RGB
- Bit Depth per Color: 1080p 8-,10-,12-bit, 4K 8-,10-,12-bit
- Visually Lossless: 4096x2160p at 60Hz (8-bit) 4:4:4 or RGB; 3840x2160p at 60Hz (12-bit) 4:2:2 Dolby Vision; 3840x2160p at 60Hz (10-bit) 4:2:2 HDR10/HLG; 1920x1080p at 60HZ (12-bit)
- Audio Format (end to end): PCM 2, 5.1, 7.1 Channel, Dolby Digital 5.1 Channel, Dolby Digital Plus, DTS 5.1 Channel, DTS–ES, DTS–HD High Resolution, DTS-HD Master Audio, Dolby Atmos
- Audio Format (HDMI Loopout): Same As End-To-End
- Embedded Audio: Stereo Analog Audio (3.5 mm jack)
- De-Embedded Audio: Balanced Stereo Analog Audio (5-pin phoenix Only) (Audio downmixed to PCM 2Ch)
- Ethernet: (1) × female RJ45, PoE
- SFP: (1) × SFP Slot
- HDMI: (2) × HDMI Type A 19-pin, female, one HDMI input, one HDMI loop out
- Audio: (1) × 5-pin Terminal Block, Balanced L/R Audio out (downmixed to 2Ch); (1) x Toslink Audio Out (Future Audio Return Support Only); (1) × 3.5 mm mini stereo jack, Audio in
- IR: (3) × 3.5 mm mini-stereo jack, one IR-Pass, one IR-EYE, one IR-out
- RS232: (1) × 3 Pin Terminal Block
- USB: (1) × USB 2.0 Type-B for USB extension and KVM; (1) × USB Type-C for MXNet service
- Distance Ethernet: 100 Meters/ 330 Feet over CAT5e and above
- SFP and Fiber: 1000BASE-SX SFP Transceiver Module (MMF, 850nm, 550m, LC, DOM); 1000BASE-LX/LH SFP 1310nm 10km Transceiver Module
- Storage Temperature: -4 to 140°F (-20 to 60°C)
- Operating Humidity: 5-90% RH (No Condensation)
- Cooling: Fanless Cooling
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com