Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4-Channel Line Output Dante Converter with Built-in DSP Mixer
Model: ML-4D/OUT-E
- 4 line output
- 4 Dante input/output
- Supports PoE (Power over Ethernet)
- Up to 24bit/96kHz
- Includes a variety of DSP functions for optimal use in different scenes/environments (Output effects, 4 in/4 out matrix mixer)
Product Info
Tech Specs
Related Products
Documents
The ML-4D/OUT-E is a compact converter that converts Dante input signals into 4-channel line output signals. With half the size of a standard 1U rack, the ML-4D/OUT-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. ML-4D/OUT-E supports up to 96kHz/24bit and uses Euroblock connectors for analog line output.
- 4 line output
- 4 Dante input/output
- Supports PoE (Power over Ethernet)
- Up to 24bit/96kHz
- Includes a variety of DSP functions for optimal use in different scenes/environments (Output effects, 4 in/4 out matrix mixer)
- Supports Dante daisy chain; this allows two Dante Compact Processor models to be connected without a network switch
- Compatible with Dante Domain Manager and Dante AES67 Mode
- Flexible scene preset function allows to work in different area situations (Up to 50 presets)
- Timer event function allows to automatically switch scenes at a specified time (planned to be compatible on a future version update)
- 2 types of user control software available for Windows/Mac/iOS/Android devices:
- For integrators: input/output routing selection, DSP/design/scene settings of the complete system, etc.
- For end-users: simple app design for only the necessary functions such as area volume settings, etc.
- Remote control via GPI and Dante
- Half-rack mountable size
- Equipped with indicators that show LAN/Dante connection status and sample rate
- Equipped with signal indicators that monitor line output signals
- Configurable reference level (via remote control only)
- Surface rack mountable angles for installation under desks included
- Optional accessories:
- AC adapter PS-P1220E for redundant power supply available
- Rack-mountable shelf AK-RS1 to install and store two Dante Compact Processor models in a 19inch rack case
- Converter Type - Other
- Dante Enabled - Yes
- Rackmountable - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Active Power: 4 Watt
- Depth: 5.36 in
- Height: 1.75 in
- Width: 8.43 in
- Product Weight: 1.90 lbs
- Rack Units (Height): 1
- Formats and channels: 44.1/48/88.2/96kHz,16/24-bit, 4 channels
- DATA/DATA+PoE connectors:
•Connector: RJ-45
•Transmission protocol: Dante
•Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
•Cables: category 5e or faster STP cables - ANALOG OUT connectors:
•Connector: Euroblock (balanced) 3.81mm pitch
•Nominal output levels: +4 dBu (when Ref. Level not -9dBFS), +6dBu (when Ref. Level set to -9dBFS)
•Maximum output level (switchable): +15dBu (Ref. Level: -9dBFS)
•+18dBu (Ref. Level: -14dBFS)
•+20dBu (Ref. Level: -16dBFS)
•+22dBu (Ref. Level: -18dBFS)
•+24dBu (Ref. Level: -20dBFS) - Output Impedance: 200ohm or lower
MM-2D-E
- 2-channel Mic/Line Input/Output Dante Converter with built-in DSP Mixer
MM-2D-X
- 1U, 2-channel Mic/Line Input/Output Dante Converter with built-in DSP Mixer
MM-4D/IN-E
- 4-Channel Mic/Line Input Dante Converter with built-in DSP Mixer
MM-4D/IN-X
- 1U, 4-Channel Mic/Line Input Dante Converter with built-in DSP Mixer
VS-R265
- AV Over IP Encoder and Decoder Appliance for 4K Live Streaming
Converter
1015575 kb
- Data Sheet
Request Quote
Suggested Products
by
Magewell Electronics
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
TASCAM
Model: ML-4D/OUT-E
Request more information from a dealer near you
close
Request more information from a dealer near you