hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
avpro-edge

Ultra Slim 100m 4K60 (4:4:4) HDR HDBaseT Extender

Model: AC-EX100-444-KIT-GEN2

  • HDMI 2.0(a/b)
  • 18Gbps Bandwidth Support (Using ICT)
  • Ultra Slim (.47 inch/12mm)
  • Up to 4K60 4:4:4 Support
  • Full HDR Support (HDR 10 and 12 Bit)
Compare
Project List
Product Info
Tech Specs
Documents

The AC-EX100-444-KIT-GEN2 is a revolutionary 4K60 4:4:4, HDR and 18Gbps supported HDBaseT extender over single CAT (6a recommended) UTP/STP.

AVPro Edge presents its 18Gbps over copper extender. Using ICT (Invisible Compression Technology) we have achieved what was thought to be impossible. We can deliver a virtually lossless high bandwidth 4K HDR signal with support for all signals up to 18Gbps. Deep Color and HDR Metadata remain intact making the transmission free of artifacts like banding. Other similar devices will deliver a sub-par image that has very visible banding and color shifting.

Invisible Compression Technology: ICT is a revolution in HDMI extension technology. This proprietary technology can compress high bandwidth HDMI signals into a more manageable size to fit through a CAT Cable "pipe". The ICT algorithm can manage all flavors of HDR including 4:4:4, 4:2:2, and 4:2:0 as well as signals up to 18Gbps and 4K 60Hz 4:4:4. The architecture of ICT allows it to be compatible with all chroma subsampling types, color spaces and HDMI Deep Color up to 12 Bit. Our technology is unique because it is truly invisible. It is not only invisible to the human eye, it is invisible to HDMI test gear and other sink devices, what comes in is what goes out. What makes ICT special is that we preserve HDR Metadata and color information and depth in its full, original, integrity. Other compression technologies sacrifice these to save space and it will cause very visible banding, color shifting and motion artifacts in the image.

This technology is backed by extensive testing in side by side comparisons of ICT vs direct connected sources. The setup is two identical displays and a single source. The source is split and sent to both displays, one using ICT and one with an 18Gbps cable. The movie is shown in HDR and evaluators are brought into determine which one is compressed. The results are conclusive, it is invisible. Even to the most trained eye.

  • HDMI 2.0(a/b)
  • 18Gbps Bandwidth Support (Using ICT)
  • Ultra Slim (.47 inch/12mm)
  • Up to 4K60 4:4:4 Support
  • Full HDR Support (HDR 10 and 12 Bit)
  • HDR, HDR10+ and HLG Support
  • Selectable USB Host
  • 4K 1080P Down-scaling for mixed systems
  • Audio Return Channel on HDMI or TOSLINK (ARC)
  • EDID Management and EDID emulate
  • 4K and HD Test Patterns built into Tx and Rx for troubleshooting
  • Ethernet Hub Capability (10/100)
  • Audio Extraction via TOSLINK on Tx
  • Audio Input via TOSLINK on RX
  • HDCP 2.2 (and all earlier versions supported)
  • USB Extension
  • CEC Pass Through
  • 3D Support
  • 100 m (330ft) on 1080P (Cat6a)
  • 100 m (330ft) on 4K (up to 4K60 4:4:4, HDR) (Cat6a)
  • Bi-directional 48v PoH (Power Over HDBaseT, only one Power Supply Needed)
  • I-Pass Feature for control system "pass-through"
  • 3-20v protection circuit built in for safe IR transport
  • Bi Directional RS232 Transport
  • LED Status, Link, Power indication lights
  • Use single UTP/STP LAN cable (CAT-5E/6A) with substitute HDMI cable to achieve long distance transmission
  • Supports uncompressed PCM 2- Ch., LPCM 5.1 and 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Atmos on HDMI
  • ESD protection circuitry (Inputs and Outputs) to 7KV
  • Can Cascade
  • Includes:
  • AC-EX100-444-T-GEN2 (Transmitter)
  • AC-EX100-444-R-GEN2 (Receiver)
  • 48V Power Supply (One supplied)
  • 1 x IR Tx Unit
  • 1 x IR Rx Unit
  • 4x 3 Pin Terminal blocks for Audio and RS232 Ports
  • Mounting Ears
 
Request Quote