hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Residential
Security & Safety
Signal Management
Search by Manufacturer
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
#
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Crestron Electronics, Inc. - QM-FTMC-NB
crestron-electronics
Request
Quote
Find
A Dealer

QuickMedia® FlipTop Media Center without Keypad

Model: QM-FTMC-NB

  • Stylish flush-mount FlipTop housing
  • Composite, S-Video and RGB/component inputs
  • 3 stereo audio and 2 gated mic/line inputs
  • 3X1 switcher with audio breakaway
  • Video sensing | Auto-switching
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The QM-FTMC-NB provides an elegant multimedia interface solutions in a stylish flush-mount tabletop design. Handsomely finished in either black anodized or brushed aluminum, the QM-FTMC-NB mounts flush in any tabletop surface for a clean, professional appearance. Wiring for the QM-FTMC-NB is extremely simple requiring just a single CresCAT™QM cable (sold separately). Individual inputs are provided for composite, S-Video, and RGB/component signals, each with corresponding stereo audio, to accept connections from portable AV devices and computers. For complete connectivity, the QM-FTMC-NB also includes an RJ45 LAN pass-thru connector and AC power receptacle. The built-in 3X1 switcher includes audio breakaway to allow the three program audio inputs to be switched independent of the video and RGB inputs. Additionally, two gated microphone inputs are included via terminal block connectors located below the table surface. Both dynamic and condenser type microphones are supported with software switchable 48V phantom power available at both microphone inputs. Balanced or unbalanced line-level sources such as wireless microphones can also be accommodated. Input gain and gating controls for each microphone/line input are fully adjustable at setup, and can also be controlled in real-time from a keypad or touchpanel. Using Crestron's revolutionary QuickMedia transport, all input signals are transmitted from the QM-FTMC-NB to any QuickMedia Receiver or Distribution Center over a single inexpensive CAT5e type cable*. Computer resolutions up to 1920 X 1200 pixels at 60Hz are supported over cable runs up to 450 feet. Audio signals are transmitted digitally with high-performance 24-bit resolution. QuickMedia dramatically simplifies system design and installation, affording a higher level of performance at a lower overall cost. Whether using just one FlipTop Box or several, complete system operation can be made transparent to the end-user with all signal routing occurring smoothly under the command of the MediaManager control system. Built-in video sensing on every video/RGB input can be utilized to trigger automatic input selection and power control. Complete MediaManager systems are easy to design, program and adjust from start to finish using Crestron SystemBuilder™ software.
  • Stylish flush-mount FlipTop housing
  • Composite, S-Video and RGB/component inputs
  • 3 stereo audio and 2 gated mic/line inputs
  • 3X1 switcher with audio breakaway
  • Video sensing | Auto-switching
  • LAN pass-thru port and AC power outlet
  • QuickMedia transport | Cresnet communications
  • Low-cost, quick and easy installation
  • Easy setup using Crestron SystemBuilder software
  • Optional cable management kit
 
Request Quote