Signal Processing Systems : Receivers & Transmitters : Datapath Ltd. - Arqa TX1/C

KVM over IP Transmitter with a 1Gb Network Copper Connection

Model: Arqa TX1/C

Endpoints – KVM matrixing with up to 2,000 endpoints
One Control technology - Allows control of multiple PC’s across a single workstation with one keyboard and mouse
Multi-head support - Sources with multiple screens can be treated ‘as one’
Push Support - Push current connection onto other displays as a video share
Pull Support - Pull (Get) any source as a video share onto this receiver

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Videos

Aiding demanding command and control environments and other AV applications, Arqa gives operators access to multiple remote sources without sacrificing video quality or round-trip latency. Suitable for those who need to monitor, control and share access to multiple remote servers, Datapath’s Arqa product range supports up to 2000 endpoints contained within a single 1Gb switched video distribution network. Arqa compliments Datapath’s award winning VSN video wall controllers, which are found today in control rooms and command centres all over the world and offers an ideal control solution for systems integrators.

Endpoints – KVM matrixing with up to 2,000 endpoints
One Control technology - Allows control of multiple PC’s across a single workstation with one keyboard and mouse
Multi-head support - Sources with multiple screens can be treated ‘as one’
Push Support - Push current connection onto other displays as a video share
Pull Support - Pull (Get) any source as a video share onto this receiver
Flexible sharing - Remote source viewing or take control
Image Quality - Visually Lossless image quality, irrespective of content
Zero Latency - Significant latency advantage over other methods including h264, RDP, VNC
Works over 1Gb network with simple switch requirements (needs only IGMP support)
Network switched or P2P (point-to-point) extension modes supported
Local extension support - Video loop through port for local extension into IP network
Security - Mass storage mode disable for securing against endpoint intrusion
Connectors - Copper and fiber versions (can be mixed)

AV-over-IP - Yes
Rackmountable - Yes
Receiver/Transmitter Cable Type - HDMI
Receiver/Transmitter Format Type - DVI
Receiver/Transmitter Format Type - HDMI
Supported Resolution - WUXGA (1920x1200)
Warranty - Yes
Spec Sheet available - Yes

Audio: Analog 16bit, 44kHz, 2ch
Cooling: free air convection
Depth: 3.86 in
Height: 1.57 in
Interfaces: 1x DVI-I in, 1x DVI-I (loop out), 1x USB-B, 2x 3.5mm Analog Audio (Line In/out), 1x RS232 via RJ11, 1x 1Gb KVM link via SFP+, 1x DC power port
Video: Up to 1920x1200 at 60Hz 24bit, Analog video modes via VGA adaptor
Width: 4.25 in
MTBF: 82820 hours
USB: USB 2.0 transparent, Max. 480 Mbit/s, Mass storage devices supported when enabled by system admin
RS232: Transparent, max. 230.400 bps
DC Voltage: 12 Volts
Storage environment: -25 to 80 Degrees C/-13 to 176 Degrees F), 80%, non condensing
Peak Power: 10 Watt
Max Distance: 150m
Product Weight: 0.62 lbs
Mounting: Built in surface mount, Rack mount kit available
Active Power: 8 Watt
Warranty (Length/Type): 3 Years
Certifications: CE, FCC
Wireless: No
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Current Draw: 1 Amps
KVM-Link data rate: 1Gbps
Network Switch Requirements: IGMP Snooping V2 or higher, Fast Leave enabled, Gateway bandwidth of 1Gbit per port
Transmission Range: 492.13 ft

Transmitters and receivers 794919 kb - Data Sheet

Project List

Datapath Arqa KVM System

Project List

Arqa - Datapath's AV-over-IP solution.

Project List

Find a Dealer