Microphones : Vocal / Announcer / Interview Microphones : DPA Microphones, Inc. - 2028-B-B01

2028-B-B01

Series: Handheld Microphones

Model: 2028-B-B01

Built for life on the road:
Renowned DPA sound
Natural vocals – from folk to metal
Reduces feedback issues
Rugged enough for the live stage

More Product Information Below

Compare

Project List

Product Info

Tech Specs

The 2028 Vocal Microphone is designed for the unique challenges of live stage performances. It is a flexible handheld vocal mic, which provides transparent, fantastic vocals to performers from a wide range of markets including live, HoW, broadcast, etc. Just plug it in and hear the vocals shine like never before. This handheld mic has a wired XLR termination.

Built for life on the road:
Renowned DPA sound
Natural vocals – from folk to metal
Reduces feedback issues
Rugged enough for the live stage
Uniform supercardioid directionality
Extreme SPL handling

Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Supercardiod

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Dynamic Range: 117 dB
Maximum SPL (Sound Pressure Level): 160 dB
Product Weight: 0.63 lbs
Additional Specifications:
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range, +/-2 dB, at 12 cm (4.7 in): 100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
Sensitivity, nominal, +/-3 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
Rated output impedance: 150 ohm
Minimum load impedance: 1 kohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
Power supply (for full performance): 48 V Phantom power (+/-4 V)
Current consumption: Max 2.5 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Diameter: 48 mm (1.9 in)
Capsule diameter: 19 mm (0.75 in)
Microphone length: 188 mm (7.4 in)
Maximum output voltage, RMS: 9 Vrms; 19 dBV; 28 dBu
Polarity: +V at pin 2 for positive sound pressure
Height: 1.44 in
Depth: 5.51 in
Width: 9.84 in
Shipping Height (with packaging): 5.51 in
Shipping Width (with packaging): 9.84 in
Shipping Weight: 2.76 lbs
Shipping Depth (with packaging): 2.76 in

Find a Dealer

Find a Distributor

Suggested Products

Modular RF Condenser Microphone with Supercardioid Pickup Pattern

by Sennheiser

e 845 - Handheld microphone (supercardioid, dynamic) with & 3-pin XLR-M. Includes (1) MZQ 800 clip & (1) carrying pouch (11.6 oz)

by Sennheiser

MK 4 - Large diaphragm microphone (cardioid, true condenser) with 24-carat-gold-plated capsule, metal housing, internal capsule shockmount & 3-pin XLR-M. Includes (1) MZQ 4 clip, & (1) carrying pouch

by Sennheiser