Microphones : Boundary Microphones : DPA Microphones, Inc. - 5006-11A

5006-11A

Series: Surround Sound Microphones

Model: 5006-11A

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

A complete surround kit combining three 4006A Omnidirectional Microphones and two 4011A Cardioid Microphones, carefully factory-matched to achieve full precision. Even though the standard tolerances on the Microphone Series are extremely low, the surround match is even closer. The specially-selected 4006As are matched within ±0.5 dB on both frequency response and sensitivity. The 4011As are matched within ±1 dB. The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphones make the 4006A Omnidirectional Microphones the perfect choice for all AB Stereo, Decca Tree or surround main array recordings.

Microphone Type - Condenser
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): -40 F
Warranty (Length/Type): 5 Years
Directional characteristics: 4006A: omnidirectional. 4011A: cardioid
Principle of operation: 4006A: pressure. 4011A pressure gradient
Frequency Range: 10 to 20 Hz to kHz
Frequency range, ± 2 dB: 4006A: 10 Hz to 20 kHz. 4011A: 40 Hz to 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz: 4006A: 40 mV/Pa; -28 dB re. 1 V/Pa
Sensitivity, nominal ±2 dB at 1 kHz: 4011A: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted: 4006A: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)). 4011A: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
Equivalent noise level, ITU-R BS.468-4: 4006A: Typ. 27 dB (max. 29 dB). 4011A: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL: 4006A: Typ. 79 dB(A). 4011A: Typ. 76 dB(A)
Total Harmonic Distortion (THD): <1 % up to 139 dB SPL peak
Minimum Load Impedance: 2 kohm
Dynamic Range: 4006A: Typ. 124 dB. 4011A: Typ. 121 dB
Max. SPL, peak before clipping: 4006A: 147 dB. 4011A: 159 dB
Switchable attenuator: 0dB/-20dB
Output Impedance: <200 ohm
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): >60 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current Consumption: 2.80 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Weight: 4006A: 163 g (5.7 oz). 4011A: 158 g (5.6 oz)
Diameter: 4006A: 16 to 19 mm (0.63 to 0.75 in). 4011A: 19 mm (0.75 in)
Capsule Diameter: 4006A: 16 mm (0.63 in). 4011A: 19 mm (0.75 in)
Output voltage, RMS: >5 V
Polarity: +V at Pin 2 for positive sound pressure
Relative Humidity (RH): Up to 90 %
Matching tolerance: 4006A: ± 0.5 dB. 4011A: ± 1 dB
Phase deviation for kit: 4006A: < 5°. 4011A: < 10°
Shipping Height (with packaging): 10 in
Shipping Width (with packaging): 12 in
Shipping Weight: 10 lbs
Shipping Depth (with packaging): 12 in
Color: Black

Surround Kit 1645 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Devio DTM-1 - Desktop Microphone

by Biamp

Wireless Table Boundary Microphone with Half-caridioid Pickup Pattern

by Sennheiser

Half-Spherical, Condenser, boundary microphone, black

by Alfatron Electronics, Inc.