hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Residential
Security & Safety
Signal Management
Search by Manufacturer
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
#
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
ESE - ES-295
ese
Request
Quote
Find
A Dealer

IRIG Time Code Generator/Translator

Model: ES-295

  • RIG-A, B or G Input/Output
  • Generates/Translates Time Code
  • .56" yellow LED Time Display
  • LCD Setup/Status Display
  • USB Setup Interface
Compare
Project List
Product Info
Tech Specs
Documents
The ES-295 is an IRIG (A, B or G) Time Code Generator and Translator. When in the Generator (stand-alone) mode, Day of Year and Time are manually set using the front panel controls or the supplied PC software. In the Translator (sync) mode, the unit accepts IRIG-A, IRIG-B or IRIG-G time code. In either mode, the ES-295 provides an IRIG-A, IRIG-B or IRIG-G time code output (AM & TTL) and a 1pps output. Input and output time code selections are also made using the front panel controls or the supplied PC software. A nine-digit .56" amber LED display (Days, Hours, Minutes & Seconds) provides a readout of the input/output time code. The IRIG time code input and outputs are via rear mounted BNC connectors. There are two outputs of the AM signal and two outputs of the TTL signal. The 1pps signal is also available on a pair of BNC connectors. The ES-295 is housed in a single height rack mount enclosure which is black anodized. The ES-295 incorporates an Error Bypass mode and a Freeze mode. In Error Bypass mode the outputs are continuously generated whether time code is erroneous or lost. In Freeze mode the outputs stop when errors in the time code input are detected or when time code is lost. The front panel controls (Menu, Up & Down) allow access to all configuration settings as displayed on the 16 x 2 character "Setup/Status" LCD. The same controls are available on the PC software which is accessible via the rear mounted USB port.
  • RIG-A, B or G Input/Output
  • Generates/Translates Time Code
  • .56" yellow LED Time Display
  • LCD Setup/Status Display
  • USB Setup Interface
  • Error Bypass/Freeze modes
  • Play speed operation
  • Wide range (100 mVPP - 10 VPP) AGC input
  • Analog or TTL Input Modes
  • One BNC Input Connector
  • Two BNC Analog Time Code Outputs
  • Two BNC TTL Time Code Outputs
  • Two BNC 1 PPS Outputs
  • Time Delay up to 9999 microseconds
  • Time Code Lock Output (DB9)
  • Settings retained in Battery Backed Ram
  • 19" single-rack height enclosure
  • Universal Power Supply (120/240 VAC)
  • Product Options:
  • UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
  • Red---Red LED Displays
  • OCXO---OCXO: Provides an Oven Controlled Crystal Oscillator.
  • NTP2---NTP Time Server: NTP Time Server output & Network Control input via Ethernet (10/100Base-T, RJ-45).
  • LED---LED:Provides a front panel mounted "Time Code Lock" green LED.
  • GPS---GPS Receiver: A GPS receiver replaces the IRIG-B Time Code Input.
  • DC---DC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
  • EXT---External Time Base: Available when a user prefers to reference the clock of an existing source of 1 MHz, 5 MHz or 10 MHz. Frequency is auto-detected.
 
Request Quote