Video Production Equipment : Video Timecode Equipment, Clocks & Timers : ESE - ES-380UE

Desktop 100 Minute Up/Down Timer (1" Displays)

Model: ES-380UE

1" Amber LED Display
100 Minute Up / Down count range (00:00 - 99:59)
Up, Down, Stop, Min-Set, Sec-Set & Reset Inputs
Optional Remote Control Plate (option "D")
Optional 3.5" Rackmount enclosure (option "P")

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ES-380UE is a 100 Minute Up / Down Timer in a desk-top case. Up and Down and Stop and Minute-Set and Second-Set and Reset control inputs are accessible on the rear connector.

1" Amber LED Display
100 Minute Up / Down count range (00:00 - 99:59)
Up, Down, Stop, Min-Set, Sec-Set & Reset Inputs
Optional Remote Control Plate (option "D")
Optional 3.5" Rackmount enclosure (option "P")
220-240 VAC (110-120 VAC is standard) & UL options available
Product Options:
Blue---Blue LED Displays
C---Crystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming function is included for greater accuracy (2-3 seconds/week).
Clear---Clear Anodized Front Panel
D---Remote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. Extra cable available.
ESE---ESE Time Code Output: An ESE Time Code output is provided allowing the unit to drive ESE Time Code Slaves.
Green---Green LED Displays
J---220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
N---Reverse Count at Zero: Changes count direction from Down to Up at Zero.
P---19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" clear or black anodized Aluminum and chassis is 5" - 10" deep.
Q---Console Mount: The unit is housed in an enclosure 8" deep, front panel is 3.5" x 9", 1/8" clear anodized aluminum.
Red---Red LED Displays
T---Tenths of Seconds: Tenths of Seconds LED Display added.
UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
W---3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied.
Y---Relay Closure at Zero: Reed Relay for Control Applications (10W max load; 500ma switching current).
Z---Stop with reed relay closure at Zero (10W max load; 500ma switching current).

Warranty - Yes

Warranty (Length/Type): 9 Years
AC Voltage: 117 Volts
Active Power: 5 Watt
Depth: 6.60 in
Height: 5 in
Width: 10 in
Certifications: UL

2timers_pg07.pdf 313 kb - Brochure

Project List

Find a Dealer

Suggested Products

NTSC/24Fps Time Code Generator/Reader with VITC

by Evertz

2RU Rack-mount Digital Display

by Evertz

2RU Rack-mount Digital Display - Green LEDs

by Evertz