Signal Processing Systems : Decoders & Encoders : IDK Corporation - NJR-P01UCW-T

4K at 60 Wallplate HDMI Encoder CAT model

Model: NJR-P01UCW-T

Up to 4K at 60 (4:4:4)
HDCP 1.4/2.2
Up to 100 m (CAT6A)
Seamless (freeze)/KVM switching
Videowall and Multiview

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The NJR-P01UCW-T is an AV over IP wallplate encoder for high definition signal transmission via category cables. This 4K solution leverages 10 Gb Ethernet switches and enables signal management of 4K at 60 (4:4:4) signals with zero latency. The NJR-P01UCW-T features LAN/RS-232C bidirectional communication.

The NJR-P01UCW-T can be powered from PoE-supported 10 GbE switch over a Category cable; this feature eliminates the need for AC adapter.

Use this product with a combination of IP-NINJAR series products.

Up to 4K at 60 (4:4:4)
HDCP 1.4/2.2
Up to 100 m (CAT6A)
Seamless (freeze)/KVM switching
Videowall and Multiview
LAN/RS-232C/USB transmission
PoE/PoE+ (IEEE 802.3at/IEEE 802.3af)

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Active Power: 12 Watt
Current Draw: 2.40 Amps
DC Voltage: 5 Volts
Depth: 2.10 in
Height: 4.50 in
Width: 6.30 in
Product Weight: 1.80 lbs
Color: White
Video/Audio Input: 1 input, HDMI/DVI 1.0 TMDS single link, HDCP 1.4/2.2, TMDS clock: Up to 300 MHz, TMDS data rate: Up to 18 Gbps Deep Color/HDR, 640x480 at 60 to 3840x2160 at 60 Reduced Blanking, 480i, 576i to 3840x2160 at 24/25/30/50/59.94/60 (4:4:4), 3840x2160 at 50/59.94/60 (4:2:0), 4096x2160 at 24/25/30/50/59.94/60 (4:4:4), 4096x2160 at 50/59.94/60 (4:2:0), Color depth: 24/30/36 bits For all supported video signals, see the table below., LPCM: Up to 8 channels, Sampling frequency: 32/44.1/48/88.2/96/176.4/192 kHz, Sample size: 16 bit to 24 bit, Connector: HDMI Type A (19-pin), Maximum distances: 98 ft. (30 m) (1080p at 60), 39 ft. (12 m) (4K at 60)
Video/Audio Output: 1 output, HDMI/DVI 1.0 TMDS single link, HDCP 1.4/2.2, TMDS clock: Up to 300 MHz, TMDS data rate: Up to 18 Gbps Deep Color/HDR 640x480 at 60 to 3840x2160 at 60 Reduced Blanking 480i, 576i to 3840x2160 at 24/25/30/50/59.94/60 (4:4:4), 3840x2160 at 50/59.94/60 (4:2:0), 4096x2160 at 24/25/30/50/59.94/60 (4:4:4), 4096x2160 at 50/59.94/60 (4:2:0), Color depth: 24/30/36 bits For all supported video signals, LPCM: Up to 8 channels, Sampling frequency: 32/44.1/48/88.2/96/176.4/192 kHz, Sample size: 16 bit to 24 bit, Connector: HDMI Type A (19-pin), Maximum distances: 98 ft. (30 m) (1080p at 60), 39 ft. (12 m) (4K at 60), 10GbE 1 output, SDVoE, AES-128, Deep Color/HDR, Supported video signals are the same as those of HDMI. RS-232C/LAN/USB, Connector: RJ-45, Maximum distance: 328 ft. (100 m), Cable: CAT6A STP
Control I/F: RS-232C: 1 port/Connector: Captive screw (3-pin), LAN: 1 port/10Base-T/100Base-TX/1000Base-T (Auto Negotiation), Auto MDI/MDI-X, Connector: RJ-45, USB: 1 port/Connector: Female Type-A (HID class)

Encoder 293300 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

MXNet 1G Decoder

by AVPro Edge

DM NAX Audio-over-IP Wall Plate with Bluetooth Audio Support, Analog Audio Input and Output, 1-Gang

by Crestron Electronics, Inc.

MXNet 1G Evolution II Decoder

by AVPro Edge