Over the last ten years, J-Tech Digital has been a major innovator in making affordable and high quality audio/video devices available to consumers everywhere. A trusted name in the residential and commercial A/V industry, our products are currently used in homes, churches, schools and businesses all over the world.
The J-Tech Digital JTECH-WP01T HDBaseT 4K@30Hz HDMI + VGA Wall Plate Extender Transmitter lets you extend the signal from a HDMI or VGA source device to a HDMI display (Ultra HD TV, monitor, projector, etc.) device that's beyond the transmission range of HDMI or VHA cables, via a mounted wall plate transmitter. Depending on the desired resolution, you can transmit a 1080p signal up to 230 ft., or a 4K@30Hz signal up to 130 ft. to a connected JTECH-WP01R receiver using Ethernet cables.
The JTECH-WP01T Extender Transmitter is ideal for many corporate settings, such as a conference rooms, lecture halls, training sites, or video-conferencing rooms. The HDMI and VGA inputs allow you to utilize a wide range of compatible devices, including older computers and laptops with VGA outputs.
Like all J-Tech Digital products, the JTECH-WP01T HDMI + VGA Wall Plate Extender Transmitter is easy to install, set up and use. Face plate, terminal blocks and mounting screws are included. You won't need an electrician, either - the JTECH-WP01R Extender Receiver's PoH (Power over HDBaseT) feature supplies the JTECH-WP01T with power via their connected Ethernet cable - no rewiring required.
- 1 HDMI Input/1 VGA Input
- HDMI 1.4/HDCP 1.4 compliant
- Transmission Protocol HDBaseT Lite
- Transmission Distance 70 meters/230 feet (1080p) 40 meters/130 feet (4K@30Hz)
- Supported Video Resolutions 4Kx2K@30Hz 1080p/1080i@60Hz 720p/720i@60Hz 480p/480i@60Hz
- Supported Audio Formats L/R stereo (PCM) Dolby Digital Dolby 5.1
- Power source Power over HDBaseT (PoH) 12V input/output
- Supports Firmware updates
- 1x Wall Plate Transmitter (JTECH-WP01T)
- 4x Mounting Screws
- 2x pin Pluggable Terminal Block
- 1x 4-pin Pluggable Terminal Block
- 1x Face Plate
- 1x User Manual
- EXTEND THE RANGE OF YOUR HDMI/VGA DEVICES. Ethernet cable connection extends the distance between your source and display up to 230 ft (1080p), or 130 feet (4K@30Hz).
- HDBASET ALLIANCE CERTFIFED WALL PLATE TRANSMITTER. This HDBaseT extender is HDMI 1.4 and HDCP 1.4 compliant, supporting 4K video signals at 30Hz through an HDMI or VGA input.
- CONNECT AND SWITCH BETWEEN HDMI AND VGA. Seamlessly swtich between the HDMI input port and VGA input port (with 3.5mm audio port). Use the button on the face of the unit to select between Automatic switch mode and Manual switch mode.
- CONTROL THE EXTENDER VIA RS-232. Control the extender set with your computer using RS-232 control to change your resolution, enable/disable auto-switching, manually switch inputs, set your EDID settings, and much more.
- POWER OVER HDBASET (PoH). Power your Transmitter from the Receiver over ethernet, allowing for a simple installation with no need to worry about a power supply or outlet upon integration.
- FREE LIFETIME SUPPORT. All J-Tech Digital Products include a One-Year Manufacturer Warranty and free lifetime technical support from our US based Customer Support Team available M-F 9AM-6PM CST at (888) 610-2818 or firstname.lastname@example.org.