Incorporates NTI's patented true autoboot USB switching - all attached USB PCs, SUNs and MACs can be booted simultaneously.
Supports HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
Fully compliant with USB (1.0, 1.1) standards.
USB SUN start-up keys are supported.
Supports MAC soft (keyboard) power-on.
SUN extra keys are emulated on USB keyboards with Windows keyboard layouts.
Supports DVI interface for crisp and clear video quality on Flat Panel Display.
Front-panel push button and hotkeys for channel selection.
LED indicators on switch show which port is active.
Auto Scan computers to catch system failures early.
Rugged metal enclosure.
Supports HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA). Female DVI-I single link connector. Single link DVI-D signal.
Female USB Type A connector. Compatible with most USB keyboards. Keyboard is hot-pluggable. Supports SUN and MAC extra keys.
Female USB Type A connector. Compatible with most USB mice, including USB IntelliMouse®. Mouse is hot-pluggable.
Regulatory Compliance :
Interface cables between your computers and the switch are required for proper operation. Use DVI-IS-xx-MM and USB-AB-xM to connect computers to the switch.
Operating temperature: 32 to 100°F (0 to 38°C). Storage temperature: -20 to 140°F (-30 to 60°C). Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Female DVI-I single link connectors. Signal type: single link digital DVI. Female USB Type B connectors. Supports USB computers (PC, SUN, and MAC) with DVI video. Multiplatform support: Windows 2000/XP/Vista/7/8/10, Windows Server 2000/2003/2008/2012/2016, Solaris, Linux, FreeBSD, and MAC OS 9/10.
Warranty (Length/Type) :
Operating Temperature (Maximum) :
Operating Temperature (Minimum) :
AC Voltage (Minimum) :
AC Voltage (Maximum) :
Control Methods; Front Panel Interface :
LEDs indicate currently selected port and mode of operation. Hold in any button for more than five seconds to go into Scan, Broadcast or Command Mode. In Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch. Scan Mode automatically and sequentially displays the video from each powered on computer for 2-255 seconds. Broadcast Mode allows the user's keystrokes to be sent to both powered on computers. (Broadcast Mode is not available for MACs.) Command Mode allows the user to give instructions to the switch through his/her keyboard. Keystrokes are not passed to the computer.
Control Methods; Keyboard :
Keyboard Scan or Command Modes are available from the keyboard using hot keys. Use the keyboard to command the switch box to select ports or configure the Scan delay. Type +<`> (or +<`>) to go into Command Mode. Press to leave Command Mode and return to Normal or Scan Mode.