320W Power Amplifier

Model: UP2321

Part #: 12135061

Class D amplifier
Main input on either removable connector or XLR or RJ 45
Main Input can have priority over the auxiliary Input
Main input has a presence control command
Main input has a high-pass filter useful for improving speech intelligibility

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

320 W power amplifier designed for the transmission of announcements and musical programmes. The amplifier is equipped with a (mic/line) main input on either removable connector or XLR or RJ 45 and an auxiliary input for music sources. The amplifier output is available either for low impedance loudspeakers or 100 to 70 V constant voltage line. The amplifier is class D with switching power supply, the overall weight is extremely reduced plus it offers a wide audio bandwidth quality.

Class D amplifier
Main input on either removable connector or XLR or RJ 45
Main Input can have priority over the auxiliary Input
Main input has a presence control command
Main input has a high-pass filter useful for improving speech intelligibility
Auxiliary input for music sources on RCA type connector
Auxiliary input with volume and tone controls
Front panel LEDs indicate the device state, the priority activation and the signal/peak level
Applicable in restaurants, shops, supermarkets, hotels, offices, department stores and industrial systems

Amplifier Type - Power Amplifier
Spec Sheet available - Yes

Depth: 9.06 in
Height: 3.46 in
Product Weight: 14.90 lbs
Shipping Weight: 17.20 lbs
Width: 17.40 in
Maximum Frequency Response (Bandwidth): 18 kHz
Maximum Frequency Response (Bandwidth): 18000 Hz
Minimum Frequency Response (Bandwidth): 50 Hz
Minimum Frequency Response (Bandwidth): 0.05 kHz
Power Output: 320 Watt
Protections: Overload, short circuit, thermal
Input Impedance: 10 kohms (Main input)
Input Impedance: 20 kohms (Aux input)
Operating Voltage: 115 to 230 V
Signal to noise rate: >60 dB (Inputs 1 to 4)
Signal to noise rate: >80 dB (Aux in)
Input sensitivity mic: -58 dBu
Input Sensitivity Line: 0 dBu
Operating Voltage: 115 to 230 or 50 to 60 V

Amplifier 526312 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Find a Distributor

Suggested Products

Power Amplifier, 600W, 2-Channel, US

by Bosch Conferencing and Public Address Systems

48Gbps 1x4 HDMI Distribution Amplifier

by AVPro Edge

2-channel Power Amplifier for Commercial Installations

by Dynacord