The DL210 NET D 2.0 hearing (induction) loop amplifier, designed for large spaces, extends hearing support to those with T-coil-enabled hearing aids and cochlear implants. Its network-control capability provides seamless, remote system set-up, operation, and monitoring via laptop or tablet. The dual-channel capability allows venues to broadcast the audio signal to two separate areas or in phased array designs.
This amplifier is well-suited for areas such as auditoriums and gymnasiums.
- Network control - allows control and calibration of unit remotely with application software
- High continuous current 12 Arms (17 Apk) per output continuous
- LCD Screen with VU metering, easy one-button menu control
- DSP Audio Processing
- Dante™ Input
- USB for firmware updates
- Input mixing, parametric equalization, compression, metal compensation, high and low-pass filters, AGC and audio delay
- Power-save mode
- Adjustable output delay for multiple amps in large venues
- Fault warning and active protection against shorted or open circuits and overheating
- Loop fault relay output
- XLR and 3-position terminal block input configurable as microphone input or line-input, balanced or unbalanced.
- Standard 2 RU, 19” rackmount
- Magnetic signal couples directly to devices equipped with telecoils (T-coils) such as hearing aids, cochlear implants, or optional loop receivers.
- Suitable for phased-array or dual-loop systems.
- Phased-array mode automatically produces 90° phase shift in slave loop output
- Meets IEC 60118-4 system performance requirements when integrated into a correctly designed and installed system.
- Test specification provided to IEC 62489-1 standard.
- Meets ADA / ADAAG guidelines.
- System Includes:
- (1) DL 210 NET D 2.0 DSP – Induction Loop Amplifier
- (1) WLC 004 – Line Cord (US)
- (1) IDP 009 – ADA Wall Plaque (T-Coil)
