Audio Production Equipment : Amplifiers (Audio) : Trinnov Audio - AMPLITUDE16

ALTITUDE16 Versatile Power Amplifier

Model: AMPLITUDE16

POWER HOUSE:
Effectively two 8-channel amplifiers on a single 3RU chassis, the Amplitude16 has dual power supplies, each requiring its own 15A AC mains power inlet.
Maximum continuous power with all 16 channels driven is 2800W at 115V and 3200W at 230V with less than 0.1% THD+N.
Maximum peak power with all 16 channels driven is 6080W with 1% THD+N.
BRIDGE TO POWER:

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Amplitude16 is the most versatile power amplifier ever designed to address the varying needs of your immersive home theater.

Designed for immersive home theaters, with custom integration in mind, the Amplitude16 becomes perhaps the most versatile power amplifier available today, providing integrators with the unique ability to meet diverse channel counts and power requirements.

POWER HOUSE:
Effectively two 8-channel amplifiers on a single 3RU chassis, the Amplitude16 has dual power supplies, each requiring its own 15A AC mains power inlet.
Maximum continuous power with all 16 channels driven is 2800W at 115V and 3200W at 230V with less than 0.1% THD+N.
Maximum peak power with all 16 channels driven is 6080W with 1% THD+N.
BRIDGE TO POWER:
In its base model, it is a 16-channel power amplifier with a power rating of 200W/channel at 8 ohms and 400W/channel at 4 ohms.
Going beyond, the Amplitude16 provides the integrator with the option to bridge pairs of amplifier channels to increase available power for specific outputs.
This enables the integrator to maximize power for the channels with the greatest demand (left, center, and right screen channels).
In bridged mode, the power increases to 800W/channel at 8 ohms and over 1,000W/channel at 4 ohms.
EFFICIENT CONNECTIVITY:
Balanced analog input is through dual Tascam pinout DB25 connectors, which eliminate the need for up to 16 individual XLR connections, making for a much more efficient connection and rack dressing.
A front panel LED display identifies normal operation, channel clipping, protection, and bridge status for each pair of channels. Trigger inputs and outputs are provided to power on the amplifier and to daisy-chain other amplifiers in the system.
PERFECT COMPANIONS:
The input level sensitivity of the Amplitude16 matches perfectly the Altitude output level to maximize dynamic range and signal-to-noise ratio.
The importance of this trait cannot be over-estimated in a theater that may have twenty or thirty speakers in a single room. If each of those speakers were producing even a small amount of noise, it would rapidly become noticeable and unacceptable.
This scenario never arises with the Amplitude16
AUDIO OVER IP READY:
Anticipating future advanced applications, another unique feature of the Amplitude16 is its optional Audio over IP input board, which provides an option for connecting the amplifier with networked audio.

Amplifier Type - Power Amplifier
Rackmountable - Yes
Warranty - Yes

Warranty (Length/Type): 5 Years
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Impedance: 47000 ohm
Number of Watts Per Channel: 200 Watt
Signal to Noise Ratio: 126 dB
Total Harmonic Distortion + Noise (THD+N): 0 %
Active Power: 125 Watt
Peak Power: 2000 Watt
Depth: 17.80 in
Height: 5.20 in
Shipping Depth (with packaging): 8.66 in
Shipping Height (with packaging): 20.87 in
Shipping Width (with packaging): 21.26 in
Width: 18.98 in
Product Weight: 45.30 lbs
Shipping Weight: 49.38 lbs
Number of Channels: 16
Number of Inputs: 2
Number of Outputs: 1

Altitude 15801165 kb - Brochure

Project List

Find a Dealer

Suggested Products

Single Channel 100W 70/100V Amplifier with Mic Input

by Vanco International

Single Channel 40W 70/100V Amplifier with Mic Input

by Vanco International

4X250W70/100V/8ohm Digital Amp w/4 Inputs

by Vanco International