Fiber saver transceiver was designed and built to help engineers and designers to be able to recover from situations where there are many signals to move over fiber, but not enough available fibers due to lack of access to run more fiber. With new fiber-saver, input any digital optical signal with data rate of up to 4.25GB/s and it will be received and then re-transmitted at CWDM wavelength and launched into CWDM multiplexer. At other end of link, signal is then de-multiplexed and restored. Up to six optical signals can be combined without complexity of having specific CWDM lasers and their spares for each of optical sources.
Plug and play
Small and portable
Optical signals up to 4.25GB/s input
Video signals up to 3 Gb/s input
Faster set and strike with fewer cables
Turns any digital optical signal into CWDM
Easy access to installed fiber infrasrtructures
Extends useful life of legacy fiber equipment
Repeats and re-transmits with new optical budget
No longer need for wavelength-specific spares in CWDM apps
Put upto 18 optical signals or up to 18 SDI video on 1 fiber
Fiber Optic Connector Type - ST-ST
Fiber Optic Signals Supported - Other
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
131 F
Operating Temperature (Minimum):
32 F
DC Voltage:
24 Volts
Product Weight:
1 lbs
Warranty (Length/Type):
7 years
Active Power:
20 Watt
Bit Rates:
19 Mbps to 3Gbps
Connectors:
1 BNC
Impedence:
75 ohms
Signal Level:
800 mVpp (nominal)
Standard:
SMPTE 425M, 297M, 292M, 259M-C and DVB-ASI
Return Loss:
>15dB at 5MHz to 1.485GHz, >10 dB at 1.5GHz to 3GHz
Jitter(wideband) HD:
<0.3 UI
Power:
9 to 24Vdc, <20W
Dimensions:
6.75 x 5.5 x 1.75 in
FS-3x3-TRX-ST
- 3 x 3CH Fiber Saver Transceiver/Remapper, 1 Fiber HUT-MUX, ST Connector
FS-6000-TX-ST
- 6CH Fiber Saver Transmitter, 6 Optical Digital Signals, ST Connector