How EDID can affect the audio output from a Blu-ray™ player.
How cross talk can negatively affect a digital video signal when it's run through unshielded twisted pair cabling.
This video describes the new SVG Multiviewer from Sierra Video Systems as displayed at the 2012 NAB Show
This video describes the process of creating a configuration for control devices that use Kramer K-Config software.
This video describes Kramer's HDBaseT solution for twisted pair applications. This solution provides users the ability to send HDMI signals at 1080P, bi-directional IR and RS-232, and 100 BaseT ethernet signals up to 328' on a single standard category cable.
This video describes Kramer's WP-500 and WP-501 classroom A/V management and control interfaces, released at the 2011 InfoComm show.
This video demonstrates how Kramer can handle EDID in twisted pair applications for analog computer graphics applications. This demonstration is from the 2011 InfoComm Show.
This video describes Kramer's expanded line of digital matrix switchers at the 2011 InfoComm Show.
This video describes how to install updated firmware on the Kramer VP-728, VP-729, VP-730, and VP-731 presentation scaler/switcher
This tutorial will guide you through setting the K-Net ID of your Kramer Control Product.
Setting the K-Net ID's is a necessary procedure to be performed before the installation of the system.
This tutorial will guide you through the steps of upgrading the firmware for any of Kramer Control Products that uses the K-Config Software. These products include SV-551, SV-552, SL-1, SL-12, and RC-6x Controllers.
Please only upgrade a units firmware if new features are needed. Upgrading firmware could result in having to create a new configuration file.
This video describes how to instal the Kramer's USB driver on to your computer. This will allow your computer to communicate with Kramer's Control Products such as RC-6X, SL-XX, and SV-55X.
This video describes the features that were added on master firmware version 1.23 for the VP-728 and VP-729, and master firmware version 1.11 for the VP-730 and VP-731. See Kramer's website for full release notes.