The BLU-CP is a pulpit control module for BSS Audio London Series Digital Signal Processors. It is built on a 2.5” X 6” aluminum plate with a Mylar overlay on the front side of the plate containing the integrated switches and status LED’s. The switches on the top of the BLU-CP adjust the height of the pulpit. The middle switches adjust the volume in the Chapel, and between these switches are five LED’s that provide a visual indication of the volume level. The bottom switch turns the sound system on and off, and it has an LED associated with it for indicating when the sound system is on. On the backside of the BLU-CP is a single RJ-45 Cat5e connector for connecting the module to the DSP, and a 3-pin Euro-block for connecting to the pulpit motor. The BLU-CP is a pulpit control designed to work with the BSS London Series of Digital Signal Processors for LDS chapel installations. It provides controls for turning on and off, and setting the volume level of the sound system, as well as adjusting the height of the pulpit in the chapel. Connections on the backside of the pulpit control consist of a 3-pin Euro style connector for the pulpit motor, and an RJ-45 connector for the sound system controls.