hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
Evertz  - X-1201-HX-AES4
Request Quote
evertz

12 x 1 HD/SD SDI Video Bypass Protected Router with 4 Levels of AES

Model: X-1201-HX-AES4

  • Supports SMPTE ST 424M (3GB/s), SMPTE ST 292-1 (1.5GB/s), SMPTE ST 259 (270, 360 or 540MB/s) and DVB-ASI video signals
  • Switch point is fully controllable from the front panel
  • Video input presence detection displayable on the front panel
  • Front panel or remote control panel version available
  • Programmable source input names available on the front panel
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

The X-1201 supporting 3G/HD/SD SDI signals, is a twelve input routing switcher that provides a convenient, low cost way to route high definition and standard definition serial digital signals. The X-1201 routers are used for 3GB/s, 1.5GB/s, 270MB/s, 360MB/s, 540MB/s and DVB-ASI serial digital signals. When the unit is ordered with the Quad 12x1 AES router option the AES output busses can be used in an "audio follow video" mode, or can be broken away from the video bus. This router features the ability for redundancy protection with a bypass relay and optional dual power supplies. The router electronics are housed in a 1RU rack mount frame and is controlled from the built-in front panel controls. Each model can also be purchased with an optional rack mount remote control panel that replaces the built-in control panel, or can be used as a second control panel. All units can also be controlled by Quartz over Ethernet, contact closures on the GPI control port or through the RS-232 or RS-422 serial remote control port using industry standard switcher protocols.

Embedded SoftSwitch™ Features (HES)
Routers equipped with Embedded SoftSwitch™ have all the features of the SoftSwitch™ versions as well as the following additional features. The embedded audio on the Video 1 buss uses Evertz patented SoftSwitch™ technology to eliminate audible pops when switches are performed (for SD, HD or 3G video). Embedded SoftSwitch™ is performed on all four audio groups.

  • Supports SMPTE ST 424M (3GB/s), SMPTE ST 292-1 (1.5GB/s), SMPTE ST 259 (270, 360 or 540MB/s) and DVB-ASI video signals
  • Switch point is fully controllable from the front panel
  • Video input presence detection displayable on the front panel
  • Front panel or remote control panel version available
  • Programmable source input names available on the front panel
  • Bypass verification test using main menu
  • Programmable tally output bus
  • GVG TEN-XL protocol and Quartz protocol are supported
  • SoftSwitch™ model provides clean video and popless AES switching
  • Video and audio input relay bypass for power failure bypass protection
  • Optional dual power configuration
  • Remote control via SNMP
 
Request Quote