hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
Lowell Manufacturing Co. - LWR-3523
Lowell Manufacturing Co. - LWR-3523 Lowell Manufacturing Co. - LWR-3523 Lowell Manufacturing Co. - LWR-3523 Lowell Manufacturing Co. - LWR-3523 Lowell Manufacturing Co. - LWR-3523 Lowell Manufacturing Co. - LWR-3523
lowell-manufacturing-company

35U Sectional Wall-Mount Rack, 23-inch Depth

Series: LWR

Model: LWR-3523

  • Overall measurements: 67.375"H x 23.05"D x 23.06"W.
  • Useable depth: 20", allowing partial extension of equipment into backbox.
  • Load capacity 300 lbs.
  • Backbox: 5.80”D with keyhole mounting slots on 16” centers, 10” x 10” opening to mount over electrical pull boxes, embossed dimples on back plane for installation of board-mounted accessories, laser-cut knockout panels on top/bottom, and 2 keyed side lock
  • Front Mounting Section: 17.06"D with fully gusseted corners and triple formed (side-to-bottom/side-to-top) wrap design mounts to backbox from the inside with 2 heavy duty spring-loaded L-pins (self seating, positive locking).
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories
The E.I.A. compliant, UL2416 listed, welded sectional wall rack consists of a backbox and mounting section made in the U.S.A. from 16 gauge certified U.S. steel. Shipped in two boxes so the backbox can be field-installed while the mounting section is loaded with equipment at the shop.
  • Overall measurements: 67.375"H x 23.05"D x 23.06"W.
  • Useable depth: 20", allowing partial extension of equipment into backbox.
  • Load capacity 300 lbs.
  • Backbox: 5.80”D with keyhole mounting slots on 16” centers, 10” x 10” opening to mount over electrical pull boxes, embossed dimples on back plane for installation of board-mounted accessories, laser-cut knockout panels on top/bottom, and 2 keyed side lock
  • Front Mounting Section: 17.06"D with fully gusseted corners and triple formed (side-to-bottom/side-to-top) wrap design mounts to backbox from the inside with 2 heavy duty spring-loaded L-pins (self seating, positive locking).
  • Roller closure keeps mounting section closed without mandatory locking.
  • E.I.A. compliant, UL 2416 Listed
  • Made in U.S.A. with 100% certified U.S. steel.
  • PilotPointTM screws (captive washers)
 
Request Quote