DI Plus2 RC with an internal long life NiMH (Nickel Metal Hydride) that can be charged off either the phantom power on the mic line, or via the 12V DC input, removing battery "throw away" as an issue. NiMH batteries exhibit no memory effect and a long life recharge cycle. The new DI Plus2 RC features a low noise high impedance input buffer with switchable 20dB Pad, and a low distortion high current output stage able to drive the longest cable runs. It represents another major step forward in active direct boxes.Packaged in a dual channel stand-alone format, the DI Plus2 RC represents a fresh look at active D.I. concepts.
Two high impedance unbalanced inputs on the front panel, running to balanced XLR outputs on the rear
Accurate left and right channel level matching keeps the stereo image centered
Level control
Dual normal gain high impedance unbalanced inputs on the front panel, running to dual balanced XLR outputs on the rear
Precision engineered
A global pad switch drops inputs by 20dB, making it suitable for all applications from the softest keyboard to the hottest broadcast levels
Maximum Input Level:
+12dB phantom powered; +6 dB Battery powered
Input Impedance:
1 M ohms
Maximum Output Level (at 10 k ohms load, phantom powered):
+17 dB +12 dB at 10 k ohms load battery powered, +11 dB at 600 ohms load, phantom powered
Output Impedance:
680 ohms Balanced
Output Signal To Noise at unweighted:
-100 dB -104 dB A weighted
Dynamic Range (at 10 k ohms load, Phantom powered):
117 dB 112 dB at 10 k ohms load battery powered, 111 dB at 600 ohms load, phantom powered
Distortion at 100 Hz:
0.0018 % 0.0028% at 1 KHz, 0.0056% at 10KHz